Hi,
I do suspect the problem should be residual issue not laser match issue
Did you try with different materials like acrylic and compare
Regards,
saravana kumar
Hi,
I do suspect the problem should be residual issue not laser match issue
Did you try with different materials like acrylic and compare
Regards,
saravana kumar
Epilog Legend 24 EX - 75W with Rotary
Fiber laser Marker 20w ( IPG)
Flat bed heat press, Mug printing, Epson 230 x 2
Flame Polishing machine, Acrylic Bender, Nicejet Flatbed printer A3+, Electrochemical etcher.
"If you think you can or you cannot - you're right" HENRY FORD