any one got any dxf of grill pattern's, vent type?
thanks
jim
any one got any dxf of grill pattern's, vent type?
thanks
jim
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Here are a couple nice vent Corel Drawings. I can't remember where they came from so I can't give proper credit to the author. Possibly the ShopBot or Vectric Forums.
thanks kieth, i have corel on one of my computers will see if i can open it or is there a way to open in aspire?
jim
Don't fret with it if you don't have Corel. I can save the drawings as EPS or DWG files, whichever you prefer.
.
are you talking like the lattice you see where you have two pieces of wood crossing? I just did this for a ravioli press. it is really simple. the slots are 1/2 the depth of the material then you just space them for the size of openings you want. I did them 1.25" apart one line and used a 1/4" bit to make the slots. then I ripped the material on my tablesaw to get them 1/4" thick and they just slipped together.
I am going to play with some curved ones and see how it works. but they will need to be cut out on the cnc fully.
Steve knight
cnc routing
here is an example of what i do with them