Harborfreight sander

[Andrew Derhammer]

Found a pneumatic 2" sander at harborfreight tonight. Some of the others that others mention are expensive, this was $25 hook and loop pad. The sanding head does orbit around. http://www.harborfreight.com/cpi/cta...emnumber=93629 I'm going to get one of the foam pads for hook and look from CSUSA and some good sanding discs. It does seem ruggedly built. Hope that is helpful.

Andrew

[Adam Morgenstern]

I own it and am not a fan. Maybe with a different pad but I found that it is not horribly reliable. I moved over to the right angle drill soon after purchasing the pnuematic.

[Richard Madison]

Problem (?) with air drills and sanders in small private shop is that you gotta run a big compressor to do the work of a 1/4 hp or less electric tool. Beyond that, air tools can indeed be very handy.