Results 1 to 2 of 2

Thread: Walker-Turner Driver Jig Saw

  1. 01-23-2009, 1:15 PM #1
    Dick Brown
    Dick Brown is offline [OP] Member
    Join Date
    Mar 2006
    Location
    Eastern Oregon
    Posts
    367

    Walker-Turner Driver Jig Saw

    Hi,

    Bought a "Driver J782" jig saw at a yard sale. Also downloaded the manual from OWWM but still have a question. By the looks of the oil on the stand, the old gal has been throwing it out. Need to know the proper rotation of the pully for these units. Mine has the pully on the right hand side when facing it. From the pictures on the net, some were reversed. Had another tool that puked oil one time and found out it was rotating the wrong way. Any info. will be appreciated.

    Thanks, Dick
    Reply With Quote Reply With Quote
  3. 01-23-2009, 1:55 PM #2
    Matt Meiser
    Matt Meiser is offline Member
    Join Date
    Mar 2003
    Location
    Monroe, MI
    Posts
    11,896
    You might try cleaning the casting around the pulley (I'm guessing its pretty gunked up with oily sawdust) and look for an arrow showing correct rotation.

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules