I totally agree with what Richard says. Routers are not shapers and thus cannot handle the load that the shaper can. I have had my DW618, DW621, DW625, PC690n and PC 890 for over 15 years and they're...
Type: Posts; User: Orlando Gonzalez; Keyword(s):
I totally agree with what Richard says. Routers are not shapers and thus cannot handle the load that the shaper can. I have had my DW618, DW621, DW625, PC690n and PC 890 for over 15 years and they're...
Mike,
I also use Brusso stop hinges in my box projects and I usually use the JB-103. I buy them directly from Brusso. The JB-102 is $29.99 + $8.60 shipping USPS Priority Mail. and the JB -103 is...
Thanks for the advice John. Much appreciated. I will follow your suggestion and apply additional coats of SC.
I'm a retired hobbyist who is working on a small project using red beech (?) (the one that has a slight reddish/pinkish tint). I mainly use GF Seal-A-Cell and then Arm-R-Seal, Tung, or Danish oils to...
The Whiteside DT bits like the one you show are the K31, K33, and K35 they have a top bearing and are 7 degree. They are for the Keller DT jig. CMT also has them. The model number are 818.113.11B and...
Jobber twist drill, forsteners, brad point
Brands - W. L. Fuller (brads), Fisch (large brad point), CMT (forstener). For jobbers anything I can get.
I used a 3/4" end mill then finished it with a 3/4" Fisch brad point bit. Don't forget to have something underneath to prevent the hole from blowing out.
I ordered the 36" DP Pro Fence, Stops, and Base in June. The expected delivery date was September, then middle of November, then middle of December, then the end of December. I was in regular...
I feel your pain and I know this is not going to help solve your issue. I once had a Ridgid contractor saw that wouldn't stay aligned even with the PALS system.. Got fed up with it, took it apart,...
No experience with their house brand. I have Tsunesaburo Maboroshi planes in 65mm and 48mm I bought from Japan. These are now available at Woodcraft. The Maboroshi blades do not need to be tapped out...
Thanks Todd. I went back and rotated them back as they were, wiped off the rollers, and the problem was fixed. But, I will take a close look at the blade edges for burrs and see if there's junk/gunk...
I just rotated the blades on my DW734 and I'm getting a finish that I didn't have before rotating the the blades. The thin line on the board (beech) is like a very small ridge the other looks like a...
From the looks of it, it seems that the bit and bushing are not concentric as Jaime said. Looking at the picture it looks like there's more distance between the cutting edge and the outside of the...
Your math is correct. A couple of things:
1. Make sure that the same part of the bushing is up against the template all the way around because the bushings are not totally concentric.
2. If you...
I have a G0833P TS, G0555LX BS, two dust collectors (wall mounted and mobile), a tenoning jig, and three Bear Crawl mobile bases from Grizzly and have been very pleased with them and their tech...
I ordered the 36" fence, a couple of stops, and the base since I already have the table and have to wait until they decide to ship it. But I think that it will be a good product.
Paul Sellers has video on sharpening that type of blade that may be worth taking a look at. I have a set of boxwood D. Flather & Sons spokeshaves that have that same type of blade with the tangs.
12x18 (216 sq. ft.) shed made into a shop. I have a Grizzly G0833P TS, Grizzly 14" BS, Jet 15" DP, PM 50 6" jointer, DW 734 planer, a 2x2 router table, all on wheels. It also has shelves, Grizzly...
Jim,
Didn't Stanley regularly, when they introduced a new type, put on the left over knobs, totes, etc. from the previous type on the new type.
Nice job on the restoration. Like Jim and Stew said it is a Type 11 because of the low knob, 3 patent dates, and smaller adjustment nut. However, both Type 11 and Type 12 had 3 patent dates behind...
I have the same saw as you do and have not experienced this even with the stock riving knife. As others have said make sure the board has one edge trued and one face flat. I always start on the...
You are going to get a wide variety of suggestions / recommendation. I think that the gap between the 1K and 8K is a bit too wide. The intermediate stone would be a good choice because it is easier...
Wooden plow planes - tool rolls.
Stanley 71 & 271 - specially made box
Record 044 & 043 - in their original boxes
I have and use both. The oil stones are inside the shop the water stones outside. I don't have to worry about them freezing here in So. Florida since we only have 3 seasons - summer, football, and...
+1 on this.