Search:

Type: Posts; User: Scott Shepherd; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.91 seconds.

  1. Replies
    4
    Views
    203

    Excellent advice Kev! I'd also pipe a little into...

    Excellent advice Kev! I'd also pipe a little into the sides where all the electronics are. Not much but maybe a little. I'm sure the motherboard would appreciate it. You could pop the cap out the...
  2. Bill, I'm 100% positive it was extira. I still...

    Bill, I'm 100% positive it was extira. I still have a couple of small signs I made with it somewhere around here. It was marketed to be the new best product for making signs. I left 1/2 a sheet of it...
  3. I don't know what size and shape you are planning...

    I don't know what size and shape you are planning on or what the mounting will be. I used it many years ago on a number of outdoor signs. I didn't find their claims to be accurate. Left untreated, it...
  4. Replies
    14
    Views
    518

    Totally agree with Gary. Moisture is controlled...

    Totally agree with Gary. Moisture is controlled by a properly designed system. It cannot be eliminated purely on the fact of what's happening to the air, the temperature of the air as it's running...
  5. Replies
    14
    Views
    518

    Images are only visible for paid contributors ($6...

    Images are only visible for paid contributors ($6 a year) now. The format changed a while back.
  6. Replies
    14
    Views
    518

    Have you tried Nitrogen? You'd need to figure...

    Have you tried Nitrogen?

    You'd need to figure out how many SCFM each laser is using. That's based on the diameter of the tubing and nozzle, I suppose, and then multiply that by 7. At 60 PSI,...
  7. Replies
    14
    Views
    518

    60 PSI on each laser? What in the world are you...

    60 PSI on each laser? What in the world are you cutting. I ran tests a long time ago and I never found a noticable difference on most materials. If you need 60 PSI on 7 lasers you are going to need a...
  8. Replies
    8
    Views
    581

    He didn't leave the internet, he's still out...

    He didn't leave the internet, he's still out there. If you seek, you shall find :)

    In my opinion, he was the most knowledgable person on the forum when it came to lasers. I contacted him once to...
  9. Replies
    8
    Views
    581

    Dave no longer contributes to this site. He is...

    Dave no longer contributes to this site. He is greatly missed, his knowledge is insane and his willingness to help is second to none.
  10. Had a customer contact us and want a pure gold...

    Had a customer contact us and want a pure gold card engraved. Can we technically do it? Sure. We could diamond drag it. The cost to replace it if it goes south? No thanks. Not worth the $50 for doing...
  11. Normally servos, Kev. Not positive on the 100,...

    Normally servos, Kev. Not positive on the 100, but on most everything else it's servos.
  12. Not sure if the same errors on the 300 but on the...

    Not sure if the same errors on the 300 but on the 300 that's listed as a hardware error. A very odd hardware error dealing with bitmaps. Is it under warranty?
  13. I've never tried it but the general rule of thumb...

    I've never tried it but the general rule of thumb I've always heard was if it's organic, the fiber doesn't like it. I'm sure there are exceptions to that, like what frequency your fiber is capable of...
  14. Replies
    5
    Views
    340

    It's been a while since I messed with the ULS,...

    It's been a while since I messed with the ULS, but if it's 2mm off on the rulers, just take the rulers off, put tape down where they were, overlapping where the edge of the ruler goes. Vector cut the...
  15. Replies
    19
    Views
    1,161

    Unfortunately the seller is in a bad spot. It's...

    Unfortunately the seller is in a bad spot. It's not "their" machine. They don't build them so they are just shipping out finished machines they get in so they don't have extra sources. Their supplier...
  16. Replies
    19
    Views
    1,161

    Great thinking Kev, that's a good work around. I...

    Great thinking Kev, that's a good work around. I researched it some time ago and there's a ceramic disc or something that will show the fiber mark but they are pretty pricey and special items. I...
  17. Replies
    19
    Views
    1,161

    You can't really align it without some pretty...

    You can't really align it without some pretty special tools. Only thing you can do is mechanically align it. You can make a couple of alignment tools to help on your other lasers. Just make sure the...
  18. Raycus will not swap it out. They aren't going to...

    Raycus will not swap it out. They aren't going to hand out sources until they get the old one back, so it's got to get to Raycus for anything to happen. That's 2 weeks there, 2 weeks back with no...
  19. Really sorry to hear that Chris. I was hoping you...

    Really sorry to hear that Chris. I was hoping you had found the issue.
  20. Replies
    19
    Views
    1,161

    I hope so Chris, that would be great. Dealing...

    I hope so Chris, that would be great. Dealing with a Chinese warranty repair isn't for the faint hearted. You can be sure you'll be down for 2 months.
  21. Replies
    19
    Views
    1,161

    It was not the power supply in the case I...

    It was not the power supply in the case I mentioned, it was the actual source. Just for reference, some dealers out of China will tell you the source from Raycus has a 1 year warranty however, Raycus...
  22. Replies
    19
    Views
    1,161

    Seen that error before, it was a bad source. Not...

    Seen that error before, it was a bad source. Not sure that's your issue, but it was in the case I know of.
  23. Replies
    7
    Views
    583

    I think -35F to 100F is a pretty unrealistic...

    I think -35F to 100F is a pretty unrealistic expectation for a display box, especially made from acrylic and glued together. I wouldn't trust a glue joint or a glue joint on acrylic in that extremes....
  24. Replies
    8
    Views
    961

    It's not too often that capital equipment isn't a...

    It's not too often that capital equipment isn't a negotiated price. The better negotiator you are, the better price you'll get. Lasers aren't commodity items so it's a fair statement that someone...
  25. In your Material Setting for that color, on the...

    In your Material Setting for that color, on the "Advanced" column on the far right side of the colors, click the drop down arrow. Select "High Quality" and try to run the same job. Report back.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4