Search:

Thanks Chuck. I am leaning toward the 3.5 primarily becuse of the much larger filter area, something around 300 square inches more. That should provide better air flow and fewer cleanings.

BTW... PSI's site states these "tempest" models are 96" tall, does that include the height of the cylcone & motor only, or is it the height from the bottom of the collection drum up to the top of the...

I have been away from Sawmill Creek for quite awhile but I have a question.

Does anyone have a Penn State Industries 3.5 horsepower dust cyclone and what is your opinion of it? I am in the...

Keith do not try to use a fan speed control for the squirrel cage motor, it will not work. Most if not all of the fans from a/c units are split phase motors and are of either one speed or have been...

Thanks Steve. These doors are set back about six feet from the front of the house (main entry into a large entryway) with a roof over that antends three feet further out so they see no direct...

I need advise on a finish for my Mahogany front doors. The doors are about ten years old and were originally finished with an oil product. The local company that fabricated these is now out of...

What a way to load a tree trunk into your truck. All you have to do is cut off the overhang,

Thanks Dennis

I did try a few searches on the archived CD that was produced to no avail. I'll give Woodcentral a try.

There was a woodworker on the Badger pond that had a Bed and breakfast in North Carolina. I am not sure if he has transferred to this site. I can not remember his name, (I think something like...

I know there are several of you that have the Tormek grinder, as do I. I am getting the woodturners set and am open to suggestions of other items. I am particuliary interested in information...

I would be interested in patches, I DO NOTwear baseball caps. With the patch I can put it on any item I choose.

Great news Ken. :) Glad the tumor was contained.

I'll put in a vote for a patch rather than a hat, I HATE BASEBALL CAPS, that way we can put a patch on any article of clothing.

Jim

My method on posts, joint one side useing that side against jointer fene joint one adjacent side then use surface planer to dimention and sqare up other two sides. You didn't mention planer...

Ken

Thanks for the reply. I have done several searches for Chaise Lounge and Fainting couch and as you did found a few pictures that looked promising. However, from the picture it would be...

Keith

I agree with your proposed rules. I definately want to see names not handles, full names prefered. I would also like to see lacation required City and State or at least State. It is nice...

Those numbers are impressive to me for such a short time in existance. You and your cohorts are doing great work and inserting improvements all the time. After having a sighted person tell me some...

Welcome to the Creek or as the buckeyes say Crick. We are all new so join right in.

I thought this might be of interest to you turners.

I have seen pedal powered lathes before but nothing with bicycle type pedals.

Thought this might be of interest

Here is a lathe for the neanderthals. I have seen some other pedal powered lathes but never one with bicycle type pedals.

Randy Thanks for the Book reference, I have already done a library check and found nothing that was useful hwoever I don't think your reccomendation was there so I'll the library order it for me....

Dave & John

Thanks for the replys. I had also made a search and came up with nothing, but I thought on an off chance someone just might have a plan source. I may have to drop this project unless...

I know, you are posting all those pics just to get enough posts to get off the junior,oops New member status. :)

All I can say Al that it had better not be as I am only some two hundred mils north of you. The rain has started, same storm front as up north, expecting something over an inch.

I have changed my auto signature to Keith M to prevent some confusion with Keith O the head man. I also will soon learn if my attempt to place my ugly mug in my posts worked.