First, some 'history'-- Right now I have 4 fiber lasers (three 30w and one 50w, all 'cheap Chinese' machines all running EzCad), and 4 C02 lasers (a 2002 model 40w Gravograph LS900, a 2010? 35w...
Type: Posts; User: Kev Williams; Keyword(s):
First, some 'history'-- Right now I have 4 fiber lasers (three 30w and one 50w, all 'cheap Chinese' machines all running EzCad), and 4 C02 lasers (a 2002 model 40w Gravograph LS900, a 2010? 35w...
Just taking a pot-shot in the dark here, but have you experimented with different "TC" timing settings? I notice yours are 150/180/200/100-- after fiddling with my settings over the years, for awhile...
Since most of my fibering is industrial oriented, text, logos & such, I don't mess much with anything BUT vector files. Right now all 4 of my fibers - newest of which is about 4 years old, none of...
I have 2 HF blowers in a garden storage box outside under my garage window that suck air from the 4 lasers in my garage shop, 1 blower per 2 lasers via blast gates. They exit into these 2 plastic...
Not sure what's going on, I haven't messed with engraving jpg's much, there's so many options, like dither or not, pixel power adjust, DPI-- for fun I took a customer's logo which is just text and a...
So, just figured out why I got such a bargain- it WORKS, which is what the eBay ad said it would do-- but the ONLY thing it'll control is the original owner's LG-TV, Polk Audio Amp, Sony DVD and...
:)-- Just did, under $31 WITH a year's service protection, so here's hoping!
So this morning I tried switching around a few HDMI cables, the TV told me to connect a cable FROM the TV's HDMI-ARC port TO the Yamaha's HDMI output port...Output? Ok, I got sound, but volume still...
Thanks all for the replies! I'm thinking the HDMI-ARC output may be the answer to my problem, just need to give it a try-- I also found that the Dish remote CAN access the 'higher' functions, just...
For many years we've been watching Dish Network on a 70" Sharp Aquos Quattron TV, with sound routed into Yamaha HTR-6230 5-channel theater sound amp. Everything is/WAS controlled by the Dish remote,...
I'm thinking your machine is a twin the old New Hermes "Optima" laser I used to have, it was a re-branded Universal, and your display is exactly the same as it was--
Concur on the magnetic...
Read this, found 2 pieces of 1/4" thick plex, put them in my 80w Chinese Triumph--
it DID get thru in one pass, but had to get down to only 4mm per second to do it, and a little slower yet would've...
So while moving my truck around the yard, the fact that I COULD move it still somewhat amazes me...
It's my trusty 2002 Ford F-250 supercab, bought it brand new in March of '02; almost zero...
Mike likely won't agree with me here, as he had a bad experience, but--- For one, consider Gravograph-- For another, consider starting out with a used machine; if things don't go as planned and you...
How well or badly does the machine cut circles? Or a 9-sided 'nonagon'? (Yes, I had to look that up!) --Pic below is a couple of 2"-ish diameter holes cut in 1/8" extruded Rowmark, with my...
I recently rebuilt four used Dell SFF computers I paid $30 each for to run my fiber lasers, I have a Win7Ultimate-64 install disk, paid like $5 each for a batch of legal licenses, bought four 1/4tb...
been awhile since I've checked in, so I'm not aware of previous posts about your problem- However, I have 4 fiber lasers, first one is 7 years old now, and I'm not sure of the newest version, but all...
For a few months, when in the basement bathroom, I could hear a slight tinkling of water from upstairs in the plastic sewer line which was right next to the john... I finally determined the valve in...
I just got this in my inbox. This has got to be THEE stupidest scam email I've ever seen. Enlarge it- notice anything missing?
511719
I'm all for tipping the servers at restaurants, bars, night clubs, casinos, etc. etc...
--but tip jars next to the cash registers at McD's and DelTaco --?
Anyone remember Sizzler Steak House's...
Nice to know about the %APPDATA% thing, I've kinda familiar with it but I didn't know I can just delete files/folders and just let the program start them over! 509331
Lately I've been buying older...
I'd still say that motor needs to be outside. AND, your vent exit is too close to the window and garage door, easy for smoke & smells to drift in...
Here's my jerry-rigged setup, which exhausts...
That's some nice work on that piece of stone!
I have 8 lasers engravers; four of them C02, and four fiber lasers-
My BIGGEST C02 is a Chinese Triumph 1390, 80 watt RECI tube with a 51" x 35"...
A test: if you have something you can use to test engrave the same image above: On screen, move the image an inch or so to the right, so 'the same place' also moves to the right in relation to the...
ditto check the belts and COGS-- one loose cog and that lead-screw not moving right will bind up the whole works... And a loose cog screw is a very good reason why the table would be out of level in...