I prefer to buy the whole collection and not the subscriptions..
Art explosion 800,000
MasterClips 500,000
.... Corel
Have fun hunting for free clipart.
Type: Posts; User: Ray Scott; Keyword(s):
I prefer to buy the whole collection and not the subscriptions..
Art explosion 800,000
MasterClips 500,000
.... Corel
Have fun hunting for free clipart.
I spent the recent few days moving two fiber / galvo laser machines. The one thing I recommend is that you calibrate your laser after moving. I simply draw a 30mm square and then adjust the...
I agree with the idea of using a 3D printer to make adapter fixtures. This helps your ONE tool accommodate more "round" stuff". I also use common Delrin on my lathe to make simple fixtures.
...
I'd like to say that most of the 20 to 50 watt fiber parts are interchangeable. As you get to the 100 watt level, the glavo mirrors and other parts just aren't up to snuff for the wattage load. I'd...
Let's try to help Katie.
What controller does your laser have?
What software do you use?
When the laser display died.. Did you hear any specific sounds? Electrical arc snapping?
here are...
I looked up the "60W Orion Motor Tech" laser machine and it appears to be using RDWorks and Ruida controller. I suggest that you download the newest version of the software. As of today I think I...
Just as some closure to this. Steve checked out his laser machine and was able to get the power turned back on. The issue was a fuse, a faulty power connection at the power cord entry into the...
Be cautious. "Simple Green" has chemicals in it that will bubble fresh paint (less than 4 days old). I found this out when I used diluted "Simple Green" to wash my car... four days after the new...
I have found a few key factors in working with engraving onto granite.
1) Make sure to use a fair DPI, Scan-Gao, Interval.. appropriate to the granite or wood. I found that granite produces nice...
I dont care what laser you have... and I don’t care who you buy your version of PhotoGrav from. ... It is really worth it. I am not a master at preparing photos for lasering... but PhotoGrav makes it...
The Kurd cutter is pretty nice stuff. I have also found anothercheap solution.. I went to my local dollar store and found the “LA’s Totally Awesome” degreaser. I used it on my Yeti tumblers with...
The tech support here is free. And pretty good quality too.
I only drink coffee right before church starts. It keeps me awake during the sermon and really kicks in when that lady gives my kids...
I think a basic pressured detecting switch can be added to the safety interlock section of most any laser system. I work with the Chinese laser machines (mostly) ... I have put the air pressure...
I basically just use the Molybdenum mirrors for everything. They are resilient! The only big downfall is the affinity to oxidize in high humidity or salty atmosphere. We just expect to replace the...
Scissors
Electrical Tape
High Voltage Tape (Marine Tape)
Masking Tape
Acetone
Denatured Alcohol
Isopropol Alcohol
Mineral Spirits
Paper Towels
Surge Protector - Power Outlet Strip...
I would like to throw my experience into this conversation. I see the difference in the laser engraving depth. So long as you have a large amount of area to engrave on the width, it will engrave...
Slow down cowboy....
You can solve these problems pretty easy. You need to use the RDWorks software and access the Vendor Settings pages. The default vendor password is "rd8888". You need to...
Laser in the multi-color Rowark plastic is as much an art as it is a science. Try these suggestions and see what your results are.
1) Only while engraving, turn down the air pressure from the...
This wireless remote is really cool.
i am ordering one for my laser... NOW!
Getting your laser to move the Z-axis during a pause status depends on the vintage. The Rabbit models (similar to automobile evolution) have improved throughout the recent 11 years. Small changes...
I just wanted to bring this thread to a close and tell other people what the solution was. Justin was able to contact me for help. I visited his workshop and started some extensive cleaning of the...
Sounds like the problem is surely the Laser tube or the Laser Power Supply. The problem is that you can't test a laser tube without a known-good power supply and a good light laser power meter. Many...
It can be difficult to diagnose problems with a laser machine... Since the problems are occurring due to time in usage. It is a fact that the sealed glass laser tube will change performance...
It looks like you are trying to build a rotary device. I would suggest that you use a really small stepper motor. .. He are some basic guidelines.
1) A NEMA 17 would be fine for driving the small...
The LaserCut 5.3 does a pretty good job of importing AutoCAD ANSI 2004 files.
I really like the interface of the Ruida controller RDWorks V8.. It does have some issues with tiny curves in DXF...