Search:

That's a really good idea. Do you think I'll be able to pull it down flat with that or will I need to remill the boards?

No breadboard ends bland it's finished both sides but it has been sitting on my ikea dining room table for the past week. That's why I have some hope that it will flatten a bit over the next few days...

Sadly my wife was opposed to an apron and wanted the top mounted directly on steel legs.

You are correct it isn't mounted. My plan was to draw down the 1/16" bow when I attached the legs however...

I just finished my first solid table top. It's air dried ash I milled from raw lumber. Moisture measured around 9%.

A local cabinet maker flattened the top with his wife belt sander. About a week...

I actually have made a table top with the jointer. It worked well but I was having issues with tapering the boards, which lead me to check if the tables were coplaner. They were not, the outfeed was...

I just bought a Grizzly G0855. I borrowed a Veritas straight edge and was able to get a .005" feeler under the straight edge when measuring corner to corner on the outfeed table. Do you guys think...