The air curtain needs at least 3cfm and can handle up to 10cfm. So the issue is, what compressor can run at 20-30psi between 3-10cfm for hours at a time without running at too high of a duty cycle....
Type: Posts; User: Kevin M. Adams; Keyword(s):
The air curtain needs at least 3cfm and can handle up to 10cfm. So the issue is, what compressor can run at 20-30psi between 3-10cfm for hours at a time without running at too high of a duty cycle....
The compressor I bought for $100 will definitely be put to good use so it's not a waste. However I'm hoping I can find a less expensive option to use with my laser system that may be more practical....
I'm inclined to agree with you Bill. Unfortunately there is no air assist at the laser head on my machine. The only source of cool air pressure to clear debris and keep flame out at bay is the air...
Hello Creekers,
As usual I've searched high an low for answers and unfortunately have come up short. Hopefully someone will be able to help.
First, I'd like to request only those familiar with...
If you don't mind Dan, would you happen to be able to explain in more detail how you would bring in tempered make-up air using a double layer pipe. I don't quite understand how it would work without...
I definitely understand the need for make up air vs. a CO leaking issue. What I don't understand is the affect of a double layer pipe on cold make-up air without some form of additional heating e.g....
Thanks Rich. I know some commercial shops use heat exchangers to temper the air a bit before it reaches the laser. I'm curious how necessary it would be. Would condensation be a real concern? Could...
Howdy Everyone,
I'm very excited to say I've purchased and received my very first laser system from epilog. It was a long time coming but a surprisingly simple process. We ended up going with an...
Anyone have any thoughts on or link to a thread about HPC?
Thanks again guys. Would any of you out there suggest another manufacturer or U.S. based dealer?
Thank you for the great info guys! I hope more keeps coming. By the way, nice Eagle Transporter Dave.
Hello all!
I am completely green to all of this. I understand that this subject has been talked to death but any information I can get from Legacy owners past and present would be greatly...