Cut your top plate to go just to the ceiling then toggle bolt the top plate to the ceiling in two places. It wont move after you sheetrock it.
Type: Posts; User: John Olier; Keyword(s):
Cut your top plate to go just to the ceiling then toggle bolt the top plate to the ceiling in two places. It wont move after you sheetrock it.
Thanks guys. I'm going to give it a shot very carefully. I don't see any nuts on the shaft. Appreciate the advice
I have new bearings coming tomorrow. Ive removed the head and I'm not sure how to proceed in removing the bearing holders to replace the bearings.
The jointer is a 1959 Delta Rockwell. According...
Gentlemen; please let me apologize for the delay in responding. Everyday life took precedence so I just took the power off the contactor and connected it straight through and the saw will run but...
Do I really need the contactor on my saw (1972 Cabinet saw)? It quit working yesterday, contactor wont draw up, and I'm not sure what to look for.
I have power to the top of the contactor and power...
If the pipe coming up the floor has threads use the regular cap and put it in upside down. All you have left is a dust catch on the floor
Try tapping the steel pipe with a hammer. Sometimes the jarring action of the blows will free the threads enough to allow movement
Gentlemen: I have an offer for several trees in my yard and the buyer says he will pay by the ton.
Any formula on how to calculate the approximate weight of these trees or will I have to wait until...
They are called window balances and any glass shop can change them for you
Wade, hopefully you enjoyed your short stay on the Mississippi Gulf Coast. The cars on the side of the road are exactly what you imagined (abandoned).
How you got lost on Bernard Bayou (It ain't...
My locksmith charges $6.50 to rekey a lock. No way in heck am I going to buy a kit, take a lock cylinder apart and try to rekey it to save $6.59 and possibly have to go buy a new lock because I...
I have in my possession a 7.5 Hp, 3 Ph cyclone motor with the Impeller attached. The impeller rotates freely for 4 or 5 mins if spun by hand.
The cyclone was rusted so I scrapped it. Also I have no...
One solution I use on new doors is dishwashing soap rubbed in the threshold it eases the friction on the bottom
Remove the screw in the top hinge that is closest to the weatherstrip.
Using a 3" screw put it in the same hole that you removed the screw from/Drive the screw in until it is snug
Try the door and...
Hi Greg, My wife did Yard Art for about 20 years for craft shows in Mississippi.
we used 1/2" b-c plywood and we primed the plywood with exterior primer before painting with exterior flat latex....
Those commercial hinges are called NRP or (non removable pin)