from what I know of this it is ok to have a larger cap. in the circuit but not smaller. does this motor use a start switch that might not be kicking out to take the cap. out of the circuit when it...
Type: Posts; User: david privett; Keyword(s):
from what I know of this it is ok to have a larger cap. in the circuit but not smaller. does this motor use a start switch that might not be kicking out to take the cap. out of the circuit when it...
Just as a fyi the 280 saw that is made in ga. can cut 9.5 inchs maxx. above blade
It was sooo wet here I could not get out into the field this spring to spray I will have to at it after the first cutting which should be coming up soon. looks like I will get quite a few bales, that...
I hate dock it is so tuff to get rid of, did you spot spray or did you boom spray your whole field?
They are back at it ,just a few days ago I went to a local saw blade maker Kenna-saw( I think that is how they spell it) they are in White Ga. just south from Fairmont, Ga. where the sawmill guys...
hickory is multi colored naturally, I would though keep as much of the dark wood out of what ever you are making as far as handles go. Hickory wood flooring is nice to have the color changes if you...
this is something these manf's need to look at now that every new house to the new codes have arc fault ,gfi panels so every circuit is arc fault and gfi protected at the panel not in a recipticle....
oil does work, I have heard to cut it with some diesel fuel so it soaks in easier ,as far as the cypress goes it is stronger than pine but not as much as oak and that would be great if I could hit...
I have a lot of red oak here that is dying so wood is not a issue , and I will cut it to dimensional size , yes it will weigh more than pine but I would think max. 400 lbs difference it is a 6 ton...
On my 20 ft dovetail trailer I am kinda tired of using pressure treated pine just to have it break at a knot when loading something heavy. I was thinking about cutting some oak for the floor, my...
I heard that aviation gas is formulated with extra oxygen molecules in it to make up for the lack of oxygen at higher altitudes any truth to that? and as far as chainsaw fuel goes no alcohol gas and...
buy a new blade then fool around which ever way you can with trying to get the kink out and save this blade for any questionable metal holding wood. That away if you hit something you are not out...
Simple wood working tools has a 120 volt to 5 volt USB combo laser , I have had real good luck with , no battery's a plus to me. It might take some fitting to your stuff though. but to look at on...
I do know that mold reproduce by spores and once the kiln is contaminated it might have to be cleaned , it might be just to spray bleach to kill the mold and then refill wood, mold spores are in the...
instead of using remotes why don't you think about putting 3 and 4 way switches at each machine you want the dust collector to run at. no batterys required either.
To get the factory rust preventative coating off I just used diesel fuel and a rag , rubbed it dry and then used minwax cause it oil based ,no issues .
might want to try a scotchbright wheel and a drill and some minwax on bare iron.
just as a fyi a analog type meter with a 100k ohms scale and a polarity switch will give you a good idea if a cap is good or not. just rotate the polarity switch from + to- and back will jump the...
The cap. does not have to be a exact match in microfarads , if you can find a larger one (microfarads wise) in the same size dimensionally it will help give the motor a jump if maybe the start...
look on the motor for a frame size , I got a motor that might work, I am only 4 miles from ga. in clevleand , tn.
The last time I used 3 - 4 inch stainless hose clamps hooked together, just be careful it will eat you and your lunch if it gets you. maybe tape over clamps would help with this some. but plenty...
one thing I did not see was what gauge wire do you have? If it is 14 gauge I would strongly suggest that you make it a 240 volt circuit.(but you will need a separate 120 volt one also for other...
I think the griz 0513 anv is close to your price 17 inch saw plenty of motor
grizzly 0766 price , I got # 33 I think off the boat, I like john k above had a tube lathe it was just a little better than not having one I guess. have no regrets on the griz .
try if you can get some old conveyor belt material, that is some tuff stuff but can be cut with a razor knife with several passes.