Search:

most new subdivisions have underground power because they use a joint trench with all the other utilities (communications and natural gas) and the developer takes care of all the trenching. power...

I had a similar problem with an old bed, i just opened the split enough to squirt some glue with a syringe, clamp and called it good. If it doesn't hold the steel or aluminum plate sounds like a...

I have had great luck with a product called evaporust, I got a gallon at o'reileys auto for about $15. Just soak the item in it for a few hours, give it a little scrub with a fine scotchbrite pad...

Are you using the original blade or did you put on a better blade? I'm curious how much better the cut quality would bee with a the wobble issue fixed and a quality blade.

I saw your post on forestry forum, have you thought about building a whole bandmill the same way some others have? Using trailer tires, stub axles, gas engine, etc. You would already be fabricating...

I do dirt work for a lot of new homes and the only we are requiref to tie the foundation wall to the slab is if its a 10'+ tall concrete wall. Depends on the original engineering. Just helps hold the...

Peachtree just had them on sale for $69, kicking myself for not buying one at that price.

Depends on your plans, all the ridged tools would probably be 100% adequate for a small hobby shop. Worst case you can get up and running for cheap and as you want to upgrade you will still be able...

Saw has a standard arbor. Haven't posted on owwm, need to resize my pictures before I can upload there.

I started with a razor scraper, then brown scotchbrite and mineral spirits with the ROS....

Picked this up off Craigslist last week, as far as I know it's a walker turner ta1180, from 1946. It has a funky throat plate, can't use a zero clearance insert. Got it all put back together last...

If it cuts accurately and consistently, I really don't care.

I also don't understand that part. I have always drilled and installed the hinges on the door following the manufacturers directions for hinge cup location. Then I simply measure from the top of the...

I just started using waterbased dye, just finished a hall table and was very pleased with he outcome. I mixed up a dark brown dye and sprayed it on a maple table, couple light coats with my cheap...

I love my keurig platinum, got it on sale at Costco for 150 with a sixty cup variety pack and the make a cup filter. I'm the only coffee drinker on my house do the single serve us perfect, plus my...

My thoughts as well, I received a gallon that had been damaged and maybe 1/3 of the finish had spilled. They sent out a new one ASAP. lots of good info on their forum and the president is a regular...

Or hit Craigslist for a used one, I had just purchased a HF DC and a week later I saw a 2hp grizzly with a canister upgrade for just a little more, HF took it back no questions asked. I was glad I...

I picked up peach trees 6 piece cabinet making set on sale a while back. Works great, usually just make 2 passes and get a nice clean cut, cope and stick cuts match up perfectly. Once i got things...

What do you not like about he zip wall system? I was interested in it for spraying waterborne finish aswell.

Heat will usually soften epoxy, he might try a heatgun and scraper to start with.

I've used hulu+, streaming through my blu ray player, worked good had lots of content, was about $8 a month. Don't know about your dsl connection speed, had no trouble on my cable.

I'm in .

i have a t2 on my 113 contractor saw and am verry happy with it, got it at lowes for about $130 out the door if i remember right. Had to drill new holes in the mounting rails, easy enough. Got it on...

i would probably just use contact cement. test fit to make sure every thing fits perfect, maybe make a reference mark or two for positioning, and go for it. If possible i like to leave whatever i can...

I dont know if they sell them at HF but the best gloves i have found are the "thickster" gloves, they last about 10X longer than any other nitrile gloves ive tried. I get them at an automotive...

I have a few, careful how tight you torque them down the handle will strip. Other than that they are great for the price