Search:

I agree with the above. Send the specific demand letter. If they continue with their re-auction efforts and you really want the item, re-register for the second auction under protest, & re-bid &...

If the Iron & heat do not work, consider trying one of the Debond Corp (or similar band) products. I have had excellent results using their marine grade product on urethane type adhesives. BTW, Heat...

Santa was good to you.

The lumber liquidators & similar butcher counter tops slabs are relatively cost effective & easy/cheap to swap out if needed. I have had good luck with Behlen's salad bowl finish. Easy to use but...

Yes, life is good when one reaches that level. Unfortunately, I have a few more buy/sells before I get there. The good news is that I can now see the light at the end of the tunnel and it is not an...

Thanks for the laugh.

Unfortunately, yes. But, soon some from of rationalization comes to mind to justify the purchase.

+1 on the peg or dowel at the end of the hole. I had had success with a vacuum used in combination with a syringe to help in moving the glue through a crack. I will have to try the compressed air...

+1. Agreed. Knowing what the OP's experience level & available equipment is would be helpful.

Just over a month ago, I purchased a used, rather heavy, drum sander at auction. The auction...

Interesting and a timely post. I also picked up a Festoo track saw kit earlier this year at a bargain but was hesitant to purchase it. I gave it considerable use over the summer. Last evening, I...

My old Milwalkee/Delta 14"'s guard in that location is wood. I believe it to be original

I have a number of Leeson (TEFC & Washdown duty) motors that are worked hard in a commercial pump application. They just keep on going. I have had a comparable Baldor fail in the same application. ...

While I understand your approach & its' ease... personally, I am more of a VE or epoxy resin w/ microspheres or other thixotropic additive. Habits from the boat repair days.

Agreed! Currently, 5 reside in my shop (including the horizontal metal cutting) but am about to put the wood cutting Milwalkee/Delta 14" for sale on CL.

Some decisions in life are easy. This strikes me as one of those easy ones. At $40 & the stated condition & blades, you should not loose any money if you decide in the future that it is not for...

And that primer can vary in thickness & can be quite brittle.

I also use my 16" Dewalt almost daily. Interestingly, it is the saw I give most respect to (probably because of its' size) & is amount the most useful.

+2. Good call

Wow! Congratulations on a great buy on a even greater drill press.

Mark; What I was referring to is the part that you have correctly identified as the Unloader in the photo responding to Lisa's post. Typically, they work so that, when the pressure switch turn off,...

INHO, an auto drain is well worth the cost & effort to install. Some types will still allow some residual water pooling in the tank. My practice has been when installing an auto drain is to put...

From the outside looking in & understanding it is the panel/sub-panel feed circuit breaker that is tripping and not the motor mounter protection:
- The first place I would start looking is at...

I tend to agree with Jim in that you have what I would consider an Ideal combination.

Interesting In looking at the photos of your new machine, it does appear to share some parts in common with the PM.

From the outside looking in: If you feel more comfortable and relaxed when you "reposition the log and the makeshift fence, and then start another cut" and do so in a safe, unhurried way, by all...