Search:

I couldn't even find it in stock anywhere close to me and only one place had 10/4 for $5.95 a board foot.

The big PATINA tool sale is happening Saturday morning in Damascus Maryland. The tailgate sales start at daybreak and the inside tables open at 8:00 AM. ...

Kutzal tools maybe? https://www.woodcraft.com/products/kutzall-original-half-round-hand-rasp-8-fine-hr8170

I have the Kreg track saw. I took my Matchfit dovetail clamps and tried them. It only took two or three strokes with a round file to make them work in the Kreg track.

We used them at work for the cnc. Sometimes they would break if the wood was really hard but in general they work great. The added advantage is they won't spark in a sander into the dust collector.

When I was working we could get the 13 ply birch in a lot of sizes, up to 5'x12' but I believe they just called it "Russian birch".

I just installed the same hardware. It left 7/8" under the doors with the doors being 2" shorter than the opening. The bottom pivot bracket installs to the side jamb and has some adjustment in it...

Since you can't get a bit in the collet. If you have a set of drills see if you can get a fractionaly smaller drill in the collet and then strike the drill bit on the side to try and knock it loose.

Happened to us in the mid nineties. Mailed a check for my son's graduation photos and never received them. Called the firm and they said they never got the money. Turns out someone got the check and...

A friend just sent me this so I'm passing it along. A different take on saw safety. https://www.youtube.com/watch?v=-VMmo-F8kJI

Bill is right. I forgot about the knife jigsaw blades. Bosch make them. I know Woodcraft has them not sure about Home Depot / Lowes. ...

Years ago I tried to cut a 1/2" rubber mat for a friend with my worm drive Skilsaw. About 4" into the cut the blade was completely warped and binding. That was with the coarsest blade I had.

What if the treads lifted up instead of risers pulling out? SOSS hinges would be good for this. You would probably need to use a lid stay to keep it open till you want to close it.

California has probably discovered that iron pipe and fittings cause cancer:D

I find I don't notice the tinnitus while wearing my aids. At night I do but I think it is better than it used to be.

Sorry, no help on building one. I did get a peek at the construction. I had to repair one of mine and when you peel back the upholstery I found out it is made mostly of 1/2" OSB with a few small...

This couple in Florida make similar products. Here is how she does it. https://www.youtube.com/watch?v=27lh-sfvrWc

Up until the early 90"s we had a Skill service center in Maryland. If you took your saw in for service they checked the serial number and gave you the price to rebuild the tool. They even painted two...

I use mine quite a lot. I also purchased the Kreg track saw and with a little filing at the bend in the clamp they fit the track to clamp it to the work. The skinny heads also come in handy for tight...

The bits we used at work for aluminum are single "O" flute up cut. Pretty much the same bits for plastics.

Why,why,why do I need 24" of paper receipt and two coupons for products we never buy when all I purchased was one loaf of bread? Yes I measured it to see how close I guessed.:D

A few years ago when all the motorcycle and car building shows were on it became a problem almost instantly. People showing up thinking they could just hang out and watch/ "help". They had to get...

Maybe the Virutex? https://www.virutextools.com/automatic-hot-melt-edgbander-eb140-pid469. I have used one and it seems like a good small machine.

In my experience they like to work everyday all day long preferably with the same edging and same thickness substrate. The tinkering starts after they set for a while or you change materials a lot....

I bought this set for my Kreg track saw. https://www.amazon.com/gp/product/B0849L6LLH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1. It probably has a connector to fit. Like Aron said Rockler has...