Search:

Thanks all, higher MERV rating it is!

Hey guys,

Thinking about building out a few Box Fan Filter builds, I saw that some companies sell 'cleanable' MERV 11 filters, I was curious if anyone who's build these or researched this before...

Thanks all ill look into the camping fuel, if not it might be a drive to Nevada soon and pick up a gallon or two for the next few years.

Hey all,

Finally ran out of my old gallon of odorless mineral spirits and these days here in SoCal you can't find regular odorless mineral spirits. I see CARB Compliant Mineral Spirits, 'Green'...

Thanks all, I think i'll let it sit outside a while, it's true I dont know the moisture content at all of the wood, we do live in a very hot and dry desert climate out in this area of SoCal but I...

Thanks alot everyone, im gonna give it a go with a scraper plane and then a really light sanding after with a hard pad on the sander to just finish it up. Pretty interesting running into this,...

Hey All,

Running into a predicament, a friend of mine wanted desk made from redwood planks from the local bigbox with some really nice figured grain. We took it, planed it, and glued up the...

Yeah I will have to agree with Jamie on this one, I was debating putting in some C channel into the tops but with the base having the steel arms I figured they should provide enough 'assistance' to...

Hi All,

Recently finished two walnut tops with rubios monocoat. I water popped them, applied a coat waited 48 hours and saw the walnut had a few thirsty spots so I did a very light sanding at 600...

One control panel controls all three legs! There is a reset mechanism you can use after assembly or i believe after adding a new top.

Thanks all for the help, I think I will go with a combo of advice, I'm thinking I will elongate the screw holes a bit more at the 'ends' and then tighten down the middle screws. At the ends I will...

Hey All,

Been working on a simple laminated top build out of walnut, about 1 1/4 inch thick. Just applied a light second coat of Rubios Monocoat and now that's drying. Finally turning my...

Thanks everyone, Steve pretty much wisdomed me into filling everything in this evening

I've been working on a new walnut desk for myself and I've got a few knots on the bottom of the desk, do I need to do anything to them besides seal em when I apply finish? I had two on the top side...

Hi Guys,

I'm working on a low and long Media console out of some walnut ply and I'm debating how to finish this so it looks nice but also durable. It's basically just a long and low bookshelf at...

Thanks all for your input, I think for now I may run some angle iron across the bottom later on, especially when I go to build a cabinet for it, based on some responses here and from some other posts...

Decided to add some extra support to create a sort of torsion box with some pine (so it matched the wing which is also pine), the only thing im a bit worried about is maybe an issue from wood...

Hi All,

Added an Incra Mast-R-Lift to the sawstop extension table, do you guys think these two extra pieces of pine are enough to prevent sagging? I dont have a heavy router in the lift, just a...