Yeah I might. Never worked with Corey he left Trotec before I started. Im sharpening cutters for a few peeps and they are asking me for supply.
Have you tried the melt pass on the s/s? and I...
Type: Posts; User: Phil Vernon; Keyword(s):
Yeah I might. Never worked with Corey he left Trotec before I started. Im sharpening cutters for a few peeps and they are asking me for supply.
Have you tried the melt pass on the s/s? and I...
Thanks for the recommendations.
AES is a pretty bog standard price very much in line with Gravograph and Trotec. I found a tooling specialist in Melb that will make them slightly cheaper but not...
Spot on Kev.
This should be a sticky note.
I didnt elaborate too much as the post was a few months old.
Howdy,
Im looking for a wholesale supplier of 11/64 diameter x 61/2 and 2 long carbide D-bit cutters.
Any recommendations.
TIA.
Phil.
This is prob too bloody late but if it is a serial/RS232 machine then no problems.
Use an ATEN converter and a Generic text only driver. To match the comms you press the tick on the 2nd startup...
Hi Rob,
I have a search regularly on Gravograph and Gravotech but today I searched Gravo and well here I am.
I hope you got this sorted it is a simple overflow error. Basically the engraving area...
Hi Chris,
Got your message.
Basically if its a Bodor then we can help if its not then probably not. We will support what we sell and also what we represent. We have already done repairs (replace...
Hey Ernest, how goes the Bodor laser?
Did you get this sorted?
Hi Chris,
Is this a Bodor machine?
I’ve recently started working at Industrial Laser in Melbourne. 20 year laser service company and recently been given the Bodor Fiber laser cutting agency for...
Googling again!
https://www.youtube.com/watch?v=dXvavw57TIg
Can be done but not sure of the edge.
If your doing a full sheet then a combination of the above 2, but it would probably mean to send 2 programs to the machine.
1 to cut through to within a smidge of right through (.05mm, 2 thou) then...
If you have a really accurate CNC Engraver it shouldn't be an issue.
Just make sure that you don't cut right through. i.e. 2mm thick brass cut to a depth of 1.9-1.95mm so the internal part wont...
+ 1
Having worked for them I am a bit biased.
Even look for a 2nd hand IS400, but try and get one with the USB communication and not the RS232/serial. The older controllers are no longer supported...
Hi Howard,
What are you looking at engraving? and what sort of usage/duty cycle?
There are really good Rotary engravers, some middle of the range and then the el cheapo, really depends on your...
Agree with this prognosis. Looks like Tickle to me as well.
You should have access to a tickle test.
Maybe pass on the PVC and the like, some materials are just plain nasty.
I had a previous customer Laser engrave some obscure plastic on the Friday arvo and the heavy fumes settled on the table...
Hey Crystal,
Did you get this sorted in the end?
Cheers,
Phil.
Aww shucks Jack...
No probs, you made the decision in the end mate, I said that I might come to the expo just to ensure you went :-) I had no agenda, just your best interests mate.
Like I said...
Hi Jack,
I hadn't really decided actually.
Got a mate down in Hoppers Crossing owns an Engraving Business that I'm gonna call to see when he's going.
I may be able to get off from work early to go...
Hi Jack,
Sorry not having been on for a while.
I am in Melbourne and have worked for 2 of the 3 multi-nationals you mentioned.
My advice would be to not sign just yet but go to the Visual Impact...
Hey Crystal,
Sorry for delay in responding. Was Unemployed for a while but landed a new job and have been a tad busy.
I would just ring up Gravograph and send them the picture.
The picture on the...
Hi Kev,
No, I don't know Bruce mate. I used to be the Victorian Territory Manager looking after Melbourne but I no longer work at Gravograph.
Gaining Y-Steps?
If you go back to the image you...
Hi Crystal,
So I assume that you have already removed the top plate on the Y-Travel, this lets you see the Y-Axis lead screw. This is on top of the beam (Y-Axis) that sticks out and holds the...
Exactly.
But I've just realised (yep that's how we spell it over here) what it is, sort of What Gary Hair referred to. The IS200 uses a rubber coupling between the stepper and the lead screw. This...