Consider the nautical approach with a stainless cable (or similar) and matching turn buckle. Add a rail of some sort just in case the lad experiences heavy seas:)
Type: Posts; User: Lud martinson; Keyword(s):
Consider the nautical approach with a stainless cable (or similar) and matching turn buckle. Add a rail of some sort just in case the lad experiences heavy seas:)
Thanks gents, yes on outswing and yes on steel clad. I have all the hardware from a previous school project that I somehow inherited including the hd hinges...somewhere close by:eek:. My original...
Yep, thought that as well. Thanks, I guess
using big box store KD framing materials.
This will be to and from my alleyway and protected somewhat by a three ft dutch roof. Budget constraints force the original plan. Obviously will seal...
I definitely agree with lighter knobs along with blending the area. There are literally hundreds of bits of information on you tube ,as an example that show coloring to match or "hide" an...
Thanks Jim. You are correct, will continue the search
Not familiar with echos but, in many cases there should be a screw governing the flow of bar oil. Utube may be helpful with something like that. I have to agree with others that knowing your chain...
I'm in the process of upgrading my Delta BS. Just about to start the painting phase. I hoped to use rattle cans. I read on owwm.org that the color was Rustoleum Smokey gray but have had difficulty...
Recently had our silver maple trimmed. This is in norcal. The general consensus was that several limbs should be cut back close to the trunk. I had them cut to
four foot lengths. The butt ends...
Brad,
Western Red is available everywhere throughout the Portland area , and Seattle as well. If you C list wrc around Portland closely for fencing material you will find little guys that cater...
Tyler,
If you have the opportunity To install a new wall inside of your existing exterior wall, adding "sound board" to it prior to final sheeting, that may do the trick. Of course, if your...
to add to this I would google, er, ask utube, for vids on steamer trunks
Steve, I agree with the 10/2 guys installed externally from a panel on your shop wall as well. The issue is when several machines kick on simultaneously and the startup draw may exceed your...
DMT dia-flat lapping plate
Fine Woodworking's Tools and Shops #230. Jeff Miller's cover story of a revised Roubo workbench worked for me. It should at least help
I agree with HF's engine hoist. Easy bolt up/ take down and store on casters. My son and friends have yanked several motors from various cars without incident that probably were 450 to 500 lbs.
...
Thanks for the info Bill. Checked out the more popular 54A. Seemed fairly clear however, no info seems available for a jointer,any jointer, that is completely out of wack. For example, if same...
I bought this used a couple years ago. So far it's been great. I noticed it was slightly out of square the other day. Closer inspection showed one of the knives had come loose. I also realized...
Woodcraft says the same. While somewhat misleading... "subsequent coats need 1 hr dry time sanding between coats"...gives the impression of adding several coats given that amber is non yellowing and...
Zinsser: cabs/ furniture...apply one or two coats , 220 or finer between coats. IF wanting heavier film, reapply process. To be honest, I've read and watched so much that it's easy to be confused....
Thanks guys,
I do NOT wish to color as the amber seemed dark enough. Will darken more with time. zinsser spray sounds right to seal. Just wondered if the amber was going to darken more with more...
Scott, I'm having issues trying to respond. thank you for yours. Wish to seal maple legs with anything somewhat clear for existing bedroom pieces
This is my first project with cabriole legs... I want this to be simple, or as simple as it can be. I applied the first coat of zinsser Bullseye shellac in amber on a sample piece that MAY look like...
Clearly out of my league...but what's BLO?
Thanks guys, appreciate the info.