Try lemon juice.
Type: Posts; User: Tom Giacomo; Keyword(s):
Try lemon juice.
If your a DIY guy this is my home made unit. The directions are free from Captain Eddie.442456
This is a 3520B.
I purchased a live center from PSI and it works great.
How about a DIY system.434870
I use a woodburner pen.
I also had the same trouble with DS tape. Also it seemed to leave a lot of glue residue to remove. Now I use hot glue.
This is a view of my finishing jig. It consists of a rotisserie motor a 1/2" bolt threaded into a piece of 1" x8 threaded rod to go into my vises and faceplates.
When using a faceplate I use a wood...
I do exactly what you proposed but run the 6x6 along the fence.
Here in Pa. it's against the law to trim oak trees this time of year because of the wilt disease.
I did all my windows with pine but used hard maple for the sills.
For several years I have been using Captain Eddie Castelin's carbide inserts. He has a good selection and very good prices. Also he has round inserts in several sizes which are hard to find...
I recently completed a box using ziricote veneer. As I went to finish I used clear shellac and it went so dark it lost almost all of the beautiful grain so I sanded the shellac off and tried again...
I have those clamps on my scroll saw and they are fussey. I don't like them either but you will get some what better with a little experience. I have used them for a long time and I still get...
Nice work looks very good.
If she is using a foot pedal I would check that first. They are known for getting contact burns.
Titebond if no parts are missing.
There are several good videos on you tube.
I also wish to welcome you to woodturning it seems you have enough to get started. However I must warn you that once you enter woodturning you must cast all hope aside you are being drawn into the...
I also use 80 to 1500 for sharpening turning tools. I bought mine on ebay from China, but now days I would go to Aliexpress.
I did something similar in that I made a 5/8" tang or tendon on a one inch bar. I have a small hobby metal lathe so I used the 1018 because it was easier to cut on a small lathe. If you have a large...
I turned a lot of blasters out of PT wood. Wear a respirator clean up well afterward and a good hot shower.
I have one similar to Rod's a dolly with a hydraulic lift.
I built mine to run on 3 or 4 wheels but I don't often use 4 wheels.
If your as cheap as me here is a homemade one.392770
Very nice ship, maybe you have gone overboard.