Is this what you are looking for: https://www.ereplacementparts.com/hex-nut-5818-p-149356.html
Type: Posts; User: Jim A. Moore; Keyword(s):
Is this what you are looking for: https://www.ereplacementparts.com/hex-nut-5818-p-149356.html
I built a Paul Sellers style workbench using his YouTube videos as a guide. i customized the bench size to my needs (as I understood them at the time). As a beginner woodworker I was able to chop...
I often use a square or hex shank screwdriver with pair of vice grips clamped on for additional leverage. The vice grip handle is at 90deg angle and force is applied direcly via pressure of my palm...
I found an article by him from June 2020 : https://www.woodshopnews.com/columns-blogs/making-is-not-designing
According to this New York Times article he was 68 in 2000. He would be 89 this year.
One or two drywall screws driven into the bench top.
Spiders? :-)
I've a Stanley no. 985N brace which has a gummy gear mechanism I'd like to clean out.
I can't figure out how to get it apart though. I tried pushing on the ping seen in the gear, but it would not...
NOTE: the replies got too deep for the forum to show - so I'm catching up at the top level]
I decided the most interesting part of the problem was that the saw started...
I decided the most interesting part of the problem was that the saw started up once I pushed the armature in.
When I took the motor apart, I had to remove a spacer on the blade end of the...
Then things took a turn for the worse - sadly by my own hand.
As I mentioned, I wanted to take the motor apart and clean it - to make sure all the impacted sawdust was cleaned out.
I wasn't...
Last night, I made use of some non-flammable tuner cleaner I've had sitting on a shelf - blasting the motor coils and bearings and the centrifugal switch.
The armature spun more easily - so I...
Was just thinking about this - and smoke doesn't happen until the motor comes up to speed. If I cycle the motor on and off - I don't get a smoke smell or actual smoke. The capacitor does not look...
I'll take a look at the switch - I've got the motor dismounted.
The spindle is a bit stiff - it rotates when I turn it - but stops quickly if I try to spin it. Is this normal - or could the...
I just picked up a 1980's vintage Craftsman Radial Arm saw. It sat in in the previous owner's damp garage for probably 10 years. There's some surface rust on the post and the particleboard table...
I've power washed my carport roof. I first ran some test on sample shingles. I didn't see a huge difference in the coating afterwards. I was careful to use a wide angle nozzle and only got close...
I'm building an extension for my contractor table saw. The saw is currently mounted on an HTC2000 mobile base.
While there are extensions available for the base, I'm curious if anyone has...
I've mounted a Delta T2 fence system to a older Craftsman contractor table saw.
I noticed yesterday that I can't adjust the angle of cut to 45 degrees. The motor mount is hitting the back rail. ...
I imagine you grin everytime you walk up the front walk. Great job!
Very nice. Thanks for sharing!
I'm in the same boat Jason. Could you let us know what you find out?
Jim
We ran down to East Carolina University to retrieve my daughter from their summer band camp program. She had a great time and made good progress on her saxophone playing. My 18yr old son helped...
I've recently gotten hooked on Woodworking Magazine. It's editted by Christopher Schartz. It focuses on craftsmanship - and especially helps fill in my understanding of why things work.