Search:

Hi Joe, I have a few questions about the lathe. First, does it have variable speed drive? I don’t like having to constantly change belts to change speeds. Second, does it have the ability to do...

I bought one a few years back and ended up returning it within a week for a refund. I found the steel plate to be way too thin, almost a little on the flimsy side, for my sawing. You would be much...

Looking to see if anyone would want to sell the Woodwork magazine electronic archive. I realize that I can buy it on a USB from Popular Woodworking and it also contains all of the Popular Woodworking...

I would be fine with one by an unknown maker. I haven’t seen any of those either.

I get the whole supply-demand thing. I did contact Lie-Nielsen and they said they quit making the drawer lock chisels in 2019 and had no plans to make any more. That’s a real bummer, because they...

Yeah, I saw that. I think that’s more than double what it retailed for. That’s crazy.

Nobody has any?

This might be a long shot, but I was wondering if anyone had a set of these that they were willing to part with. I’m not sure if they came as a set; I’m guessing they were two different sizes...

I haven’t really checked, but that’s a good point. Actually, I need to adjust it again because somehow the open end is WAY off from the closed end. Seems like every time I use this machine, there’s...

That ended up working, thank you.

Pm sent………………….

I don’t have the part of the manual that tells how to adjust the set screws.

If you’re talking about these bolts that ride up and down in the slot, then yes they are loose.

I have an older Performax 22-44 that I had to fabricate a motor mount bracket. When I put everything back together, now I can’t adjust the table up. Notice both of the aluminum brackets on both...

I would assume they are speaking of the dual rods that protrude from the side of the Stanley 45 (and 55) combination plane that the adjustable fence rides on.

+1 on The Earlex sprayer. I have one and it’s easy to use and easy to clean.

PM sent.....................

Where is a good place to find vacuum bags, breather mesh, and other vacuum accessories without breaking the bank? My local Woodcraft doesn’t carry any of that stuff...

I got a toolbox full of tools from an older guy and these little hammers were in it. Does anyone know what they are for or if they’re some sort of specialty hammer?

I might have to modify (bend) a pair of needle nose pliers to get that to work. But it’s worth a shot.

Yes, I do have that tool, but I can’t get my fingers in to pull on the paper. I might modify a pair of needle nose pliers and bend them so that I can reach in and grab the end with those to try and...

Both ends have a clip to hold the paper, but it’s the one near the motor that is supposed to hold the paper tight. It doesn’t appear to be doing its job and I can’t get my fingers in there to pull...

I have a Performax 22-44 sander and I just cant seem to get the sandpaper on the drum tight enough. I have the paper oriented on the drum correctly, following the arrow on the paper, but i cant seem...

Guess i’ll have to do a little more investigating on any leaks in the can and/or lid. Worst case scenario, I’ll have to do like what Art mentioned and upgrade to a better unit. Thanks for the tips,...

The lid has a foam gasket. How can I make sure it is sealing properly?