Search:

When you know what saw/blade length you're getting, I would suggest starting with Supercut Blades. They are far less expensive than many of the names you hear people talk about on this and other...

It's a good middle of the road saw, IMO
It's a step up from a cast iron 14" Asian import or Delta clone and not so expensive that it kills your budget.
IME, They claim to take a 1" blade but as...

With all due respect, That's your experience, mine and others are not quite the same.
I have resawn Sapele, 9 1/2" with my Grizzly GO513 and did not have any of the issues you mention. Yes it's a...

Ssssshhhh keep quiet, everything is going smooth, so far


As to fences, I don't really care for any of the extruded aluminum (usually proprietary) fence rails and ONE sided fences found on most...

You just did it :rolleyes:

I agree with John TenEyck 100%

Another reason for height/resaw capacity, is when using sleds, jigs and so on.
My sled is 3/4" thick and there are times when I could certainly use that little bit extra.
So when I cut something...

The jaw "flexing" into position, conforming to the work piece, can also blunt or round-over the edges of said piece if leather or cork aren't used.

https://thecraftsmanstore.com/product/no-wax-no-1-diamond-glazing-points-5-16/

Personally, I think 2hp is minimum for resawing 12" lumber.
It can be done with less but it would be very slow going, as you're aware.
A saw that handles a 3/4" blade would be "better" for resawing...

You could always go for a combo...

William, I looked quite a bit this morning and couldn't find any information on that topic one way or the other. I was going to suggest that you experiment but you already did.
Glad it worked and...

Thanks a lot, I thought I was looking at the wrong finish at first.
I appreciate it, good info to have.

John, thanks for the info on those finishes.
I don't see where Kem Aqua Plus has a dual UV package, I'm not seeing the "HALS", could you direct me....

I wouldn't expose it to sunlight if I could avoid it. The color (mineral staining) can last years if cared for.
I have some that's quite old that still has vibrant color. If you're truley worried,...

Well as always, it depends.
Certainly you can get a catch but I never found it that likely,
You are cutting with the lower (right) wing, this usually indicates that the gouge is slightly tilted...

Personal preference of course.
Most BOB gouges are just a very basic straight accross grind.
The left wing really isn't doing any cutting. If you're worried about it catching, you certainly can...

Wonderful pomelle figure on hte doors
It looks great to me and I'm guessing, almost 7' tall?
Nice work

Thanks Maurice, I love it :)

As much as I'd like to do a simple tent, during the winter our winds are too strong for it to withstand. If I build something with a roof, it will be solid.
Thanks again

Thanks Jim, that's what I'm doing now.
Just checking to see if anyone has any other clever solutions

If you're eventually going to cover it with drywall or T&G, I wouldn't go to the trouble of adding any additional layers of scrim paper or anything. I don't know that it would benefit you.
Depending...

I've officially run out of room to store wood inside. Actually that happened long ago, I just wouldn't admit it.
I'm just looking for any tips or methods you members use when storing outside.
I...

Edwin, I think you and Brian are correct, I could have worded the question better but I fear none of it would make a difference.
In gross generalizations
Some who responded simply didn't get what I...

Time will tell indeed, there is no rule set in stone, lots of variable at play.
Here are a few things the OP and possibly others might find useful....

There is fitted and then there's fitted.
Top chisel looks to be fitted well but maybe on the tight side.
Middle chisel has virtually no gap, that's too tight. IMO
The Stanley has too large of a...