That is a good idea, I think I will write him and tell him I want to see Norm!
Type: Posts; User: Bob Fraser; Keyword(s):
That is a good idea, I think I will write him and tell him I want to see Norm!
it has documented usage for closing wounds in humans (for many years, now), I don't spoze it would be THAT toxic given your application.
bob
Hi there Pat
Maybe find some Lexan - it is "softer" than PlexiGlass.
(it is a polycarbonate, PG is an Acrylic)
Lexan has much higher impact stats than PlexiGlass, which makes it good for...
And freeze the chuck area firmly with Chill Spray )avail at electronic service stores). The different metals will contract differently and the bit will release.
Maybe even no need to tap it.
bob
As David suggests, "seriously consider making two identical boxes" and then cut the second as you did the first one.
It would give you two boxes not?
One that is the top "half" times two,...
Depending on the size of your project,
I have had the best results by doing it by hand.
You can plane an edge close to what you want, slowly.
Or you can use the edge of a chisel or cabinet...
Hello Joe,
Why not send them a small piece of wood that you have handcrafted,
something that will fit in an envelope like a veneer with a finish on it, and tell them thay they now owe and are...
And after all those years it still has the guard on it, so many people of that era took them off - (first thing my dad would do) , much less worry about dust collection!
bob
Place a square or circle of masking tape, or putty or cooked spaghetti on the floor before you go to bed. Or one of each.
See if "they" go around it or over it, come morningtime.
Also leave...
I used some of my leftover to surface a router table fence that had to be extra long. Worked out just fine.
Where I am I just bought an auto drain valve from Princess Auto, your Harbour Frieght type of place.
It releases when pressure is off, and then drains but closes when pressure in tank rises.
It...
Hi Brent, I have always noticed that, too.
I think it is part cheap machine oil, and part camphor.
The smell always reminds me of mothballs.
(which you have to be old enuf to bring to...
"They are kinda weird but it is not for me to judge."
...you just did.
bob
I for one would love to see pix of that ship model.
Anyone else?
bob
Any one of a number of very good quality handbuilt knives that I keep handy on the workbench.
bob
I would second the vote to get this book, I found it around the time I was building my hot glass shop in a hundred year old general store, and was spending my time alone at this place restoring it....
That has always been my point too Mike, but everytime I mention the "left fence"
people bring up kick back.
I dunno....
And you can also use the drywall sander pads that have larger surfaces, and large handle-grips. Leave an old sheet in place for some grip.
It has never occured to me as unusual 'cos I almost always have the TS fence to the left of the blade, that is how I learned, and still set it that way after decades.
(I can hear the "oh my gawd...
Jewelers alomost always have three wheel systems, as do many metal workers.
Find a jewelry supply shop or catalogue, for the mandrel fittings.
The WorkTune manufacturer page show attenuation over frequency in the specs sheet.
Far more info than the "wear on the airplane" brands, and far better specs.
...
Something to be mindful of almost all of the electronic noise cancellation headphones, is that there is only about 10dB attenuation at 300 Hertz and below.
A dramatic change on an airplane maybe...
Hi
Try going in the other direction from heating it up.
By some "Freeze" or "Chill" Spray from and electronic service place,
and first freeze the taper, then try a tap or two, failin gthat...
... Just googled specs on the truck and they say 51" wheel to wheel...
I mean this in the best of fun Eric - but what a commentary on today's technology this is - here is a guy who builds...
http://www.acronymfinder.com/
I use it at work and play,
Bob