Search:

No, it is much worse. The picture doesn't really show it well enough because I couldn't get the lighting right.

Thank you all for the suggestions. I'm going to try the mineral spirits route. Just for reference, here's a picture of the table top. You can see how badly the wax is blotched.
484211

I know this has been asked and answered in various different forms before but I believe there are some specifics in my situation below that might warrant a different approach, so I'm asking this...

Thanks guys. This is in southern CT, by the way.

The building across the street from my work just had 2 huge trees taken down. One of them got chopped up (as can be seen on one of the pictures) but there's another equally big that's still intact....

I'm sorry for not updating this thread for so long.

Thanks to Trent's great help, I managed to get this correctly aligned. I'll try to explain how we got to the bottom of this:

First of all,...

Sawstop has amazing customer service and Trent is one of the best people there. It's obvious that he truly cares about the customers and loves what he does (I spent at least an hour on the phone...

Thank you Charlie. I'll try asking for Trent. In that past couple of times I called them, I had nothing put super knowledgeable techs on the other end of the line. This time however, the guy was...

David - Yes I agree with you that the front would need to be shimmed but this is not the procedure SawStop outlines in the manual and it's not even that easy b/c the top is attached to both the...

I've been a proud owner of a SawStop ICS (industrial version) table saw for a number of years, and have had nothing but a great experience with the saw and their customer service. This is the first...

Thanks both Prashun and Edwin for the replies and insight. I applied 3 coats of the SM finish about a week ago (last coat) and thoroughly buffed it out after each coat so it's not tacky. I think I'll...

Anybody? All suggestions are welcome...

Thanks

Hi,

I've been using Sam Maloof's finish for a couple of years now and found out like many others that while it's beautiful it's not as durable as I'd like it to be. (I always mix my own: 1/3 tung...

I don't have a picture of the name plate but I checked it just now and it says 120/240. I can't really take a picture of if since it's totally rubbed out, so I just put a piece of paper over it and...

Thank you everyone for replying. I might just have to take apart the motor to identify the wires coming out of the 2 windings. As to why I'd like to switch this to 240V when it was working fine at...

Thanks for taking the time to reply. Unfortunately, there's not diagram on the inside of the cover. It's just plain black. I think the diagram the manual is referring to is the one that I took a...

I've had my good ol' trusty Craftsman 20 Gal compressor (model #: 919.176730) you years now. It has a dual voltage motor (MO-6340) but it's always been wired to 120V.

I recently added a 240V line...