Make sure you sign up on their website to be notified when they are available. I have been able to get several different planes that way. I have learned you need to move quickly when they get stock,...
Type: Posts; User: Jim OConnor; Keyword(s):
Make sure you sign up on their website to be notified when they are available. I have been able to get several different planes that way. I have learned you need to move quickly when they get stock,...
Jadawley.com
industrial mitre saw stations. Excellent fences with no flex and easy repeatability. Not inexpensive, but industrial equipment never is.
Prefer the X style since they don’t slip down my shoulder. Be careful of the metal hammer loops or tape measure holders…. They can drag across cabinets and tools and scratch all your hard work.
Should be the same width as the body. If yours is narrow, you may have to bias it to one side to see if you can get it to the edge……. But 1/16” is a big gap
Thank You. Order has been placed with raised gantry, spindle, and several other bells and whistles!
Getting ready to order a CAMaster Stinger 1. Should I get the 2” gantry lift option?
I hate spell check….. the valves allow you to decide if you want the cylinders to operate independently or together.
The tilting feature on Mac’s clamps is very useful to push or pull your work tight against the cross cut fence. It helps prevent movement when the clamp extends. The OEM cam clamp is an example...
Yes. I just mixed some components this week.
To custom make a length of pipe, a sleeve is used over the cut end of a pipe. Blastgate Co sleeves are not compatible with Nordfab pipe. I suspect...
Yes please
Thanks, those two comments help a lot. I appreciate your perspective on the Hammer, nice to know that maybe what I experienced was a bit of a fluke. Thanks again
Thanks! That definitely answered my question. I’ve got other Felder equipment that I’m very happy with. Guess I won’t tempt fate and stay with what works!
Can anyone comment about the Grizzly G0564, 6” x 108” sander? I was comparing it to the Hammer HS 950 thinking the Hammer would have a better fit & finish. While nice, I wasn’t impressed with how...
OMGA is not in the same category as the saws described. It is an industrial quality machine with a higher powered motor and much better quality bearings. Yes, you can buy any of the saws listed, they...
Wood Werks in Columbus
Don, you could also come to one of the Valley Woodworkers of West Virginia meetings and ask there, lots of members and the meetings are right outside of Charleston.
Thank You , very helpful
i did order the 510 with the guides installed. I appreciate your candor, I will now know what to expect.
About to order a Felder bandsaw. Anyone have any opinions on their new ceramic guides vs their more traditional Euro guides? I do anticipate using the full range of blade sizes (3/8 to 1-1/18) for...