How you tell they are backed out from that angle is beyond me. You really think he backed them out after showing the curls? The only showed a tapered curl, and one plane shows an angled iron. The...
Type: Posts; User: Richard Coers; Keyword(s):
How you tell they are backed out from that angle is beyond me. You really think he backed them out after showing the curls? The only showed a tapered curl, and one plane shows an angled iron. The...
Hopefully the wheel has not spun on the bushing and galled the surfaces. Start with penetrating oil or a mixture of transmission fluid and acetone. You might try a few taps with a dead blow mallet...
Incredibly wide mouth on those two planes. Many craftsman would want to add an inlay to bring those up to high quality.
ALL resin is expensive!!!! If done incorrectly, it really get's expensive when you have to do it over. If no one has done it in that shop, make sure he does a practice piece. It'll be heart breaking...
5" wide is going to show some kind of crack over the years. That flat sawn wood is going to shrink next winter and this will be the result. Quarter sawn is a much better choice.
519074
What was your logic to not glue the floating tenon? Would you do the same test with a traditional mortise and tenon and not glue them? Joinery with no glue just defies logic.
What does the $225 piece of aluminum provide that a straight 1x2 can not give you? Especially when you use it like a story stick like Cliff does. It's hard to beat the accuracy of a knife or sharp...
Asian woodworkers work on a beam and two sawhorses, or less. https://covingtonandsons.com/2020/08/19/the-japanese-floor-workbench-atedai-%E5%BD%93%E3%81%A6%E5%8F%B0-by-dominic-campbell-part-2/
It takes a special personality to do this work for a profession. For me, I knew a few years in that I was a lot better craftsman than businessman. I closed my business after 8 years before going back...
Using a tape measure has always worked for me, especially considering that costs $225
Plumbing flanges
It was a preemptive strike, not helping him sell his gospel. 10 posts and no mention yet.
I tend not to trust sites with half dressed women on it. I made a mistake clicking on it. I'll likely get a 1000% increase in Etsy spam now. Personally I would not buy that style of saw anyway.
Cheap and resaw should not go in the same sentence. Resawing is the most difficult operation on a bandsaw and you need a good machine to do it.
Can we start a lottery to see how many posts before the name Snodgrass comes up?
The powder post beetle holes trump the pith when it comes to concern.
They will survive a dehumidifier kiln drying process.
Geoff has never come back. I think we can stop suggesting solutions until he comes back.
You might want to look at the reviews on Krylon's page. https://www.krylon.com/en/products/clear-coatings/uv-archival-varnish?bvstate=pg:2/ct:q#accordion-0df0f62715-item-ba23edc080
The center of the wood has to reach 133 degrees, so usually sterilizing wood requires heat around 150 degrees F to get the center hot enough.
Sosrry Mel, but very little of that makes sense to me. No idea what young girls has to do with wood rot resistance.
A conspiracy theory? I trust what I have used more than books, but not believing science has become a real issue these days.
Flame Box Elder
Actually poplar heartwood is rated as; Rot Resistance: Heartwood is rated as being moderately durable to non-durable; susceptible to insect attack.
https://www.wood-database.com/yellow-poplar/#
Mirka has variable speed on their vac.