Search:

John.. I was thinking the same thing. I know PG needs moisture to set up and this joint did not seem to have that. New to polyurethane glue. I use TB 3 almost exclusive. Not brokedon't fix it lol.
...

I have a piece on a repair project that someone glued up with polyurethane glue.

The glue joint broke and they have asked me to repair it. What's the best way to get the old glue out of the joint?...

Finally found me a can of the BIN so I will be using that. 45.00 a gal but its suppose to be good stuff.. Hope so

Locally all I could find is Kiltz Oil base primer. One can with the low odor other red can as reg oil base. Any huge difference in the BIN and Kiltz besides the shellac addition?

Ok. Ill pick up some BIN. Research shows its some of the best stuff out there. Should be for the price lol

Have been tasked to build a doll house for the gran kids. Its going to be 72H x 48W x 24D. Yeah it’s a big one.

Going with Birch ply and my thought pattern is doing a SealCoat sealer then paint....

10" Table Saw...………..

All went together good. Only thing i have concerns with is riving knife.


Seems it loose side to side. I can push on it from the left and it moves off the blade a good 3/16. Let go and it jumps...

So I am building a small 8×10 lawn shed. My question is on the end walls I need to start my stud layout from the end that will be added when I raise the wall so as to mimic where the siding will...

If I did buy it I would not give him asking price. I already have one that I use on a reg basis. I do everything with the one I have now. I worked on it and got it tuned up, new Neg blade on it etc.....

So I am going through CL today and I find a brand new in the box 113.197150 Craft RAS. Never been out of the box. Its MINT lol.

Does anyone have this model? It has the miter lock in the front...

I left the poly in all day until I finished up my 3 coats. This is my first sprayer so I do not know a lot about them other than what I have read. But.. I like this unit. get a 20% off and its 95.00...

My poly is water based. Project will hang on wall and not have a lot of handling so to speak. Ill do the coats today then wash out the cup and do it again tomorrow. Only so many coats in a day lol
...

Makes sense.

Thanks for the input. Its a 100.00 sprayer but still like to not destroy it hahahah

Soo I went out and bought me a fancy HVLP sprayer from HF 44677. Thought I could get started with its and down the line upgrade if needed.

Its probably a stupid question but..... It tells me to...

For those who have a PC band saw and have done the Carter upgrade do you like the change?

Did u use the Delta kit or the Jet kit? Part Number handy..

Thanks

Looks like he may have the saw sold. My fall back is 1 of 2.

1 Being the price drop @lowes on the PC. I can get it for $387.00

2. Is the ol HF saw for $295.00 after coupons..

I will not be...

I ended up going with the PF from NT.

...

Here is the actual PDF of the Engler sawhorse. Well the layout pg. PDF was too big to post up. If u want the entire pdf pm me..

~~~UPDATE~~~~ In case someone searches for the same problem Ill throw in an update. The Thermal switch I ordered fixed my RAS. its good "new" now.

Thanks for all the imput!!!!!!!!!

First off... Happy Veterans Day to all the vets!!


I have a small 12x16 "shop" that is un insulated and I would like to add in a heater for the time that I am working. Im not out there everyday...

Got a #22401 14" BS on my local CL for $300.00. Sounds a little steep on the price but Im not sure how old this model is. Looks clean in the pic.



Thoughts

Yeah Lee I went up on there site and looked up the switch number. They have them and I have one in the mail. $42.00 Total. Just glad they still cry them. I luv my RAS even though most of the world...

yeah I found that page too Ken. I need more numbers off my switch to see if I can match something up. SO many. lol

I was thinking maybe a quick blow fuse as I am having a hard time finding the switch. Anyone know what the numbers mean on these switches? Cat seem find that info....