Search:

+1 for fiberglass between the joists then 1" foam, just make sure you tuck tape the seams.

Glen, can't offer you any advice, but I do however believe I helped much out your basement. I mostly spent the day with your sons, but if I remember right you helped find me a pair of gloves. ...

I graduated from a woodworking and building trades program last may and have spent the last 10months working for myself and building up my tool collection. But, my jointer, table, band and miter saw...

you think its bad when you loose your tape? There are days I'm lucky if I can find my table saw :rolleyes:

I use TBIII exclusively, just because the price difference is so marginal.. especially when you factor in how much usage you get out of a bottle. I've never had a problem or glue failure.

Definitely on my to do list. Just this past week I had two very high end mountain bikes stolen off my front porch, and I know its going to be hard to remember/ prove the parts groups I had on them.

Kyle, The planer will give you parallel faces, but a jointer will not. The opposing edge of the piece you are running on the jointer has no bearing on the cut, so therefore they don't remain...

at least now I know what to tell people when they ask me what I want for Christmas.

. Even multiply plywood is not as anisotropic; there is always one more layer running running in the face direction than in the core cross-ply direction, so it moves more in one direction than the...

Thanks for all the help, you guys rock! I downloaded a trial of cutlist, it seems very useful. I feel like I possess most (some) of the skills to be a decent woodworker.. now I just have to learn...

I understand what your saying, and I do this sometimes too. If I'm making a piece for myself, like a box or something creative I often work this way. But when I'm doing mdf/plywood cabinets and...

Up to now I've always worked from plans, which often come with cut lists and written descriptions of the process. I'm starting to venture into designing my own projects though. Do you normally do...

I'm in the process of making a small jewelry box. I want to bevel the edges of the top.. So, set the blade to 15 degrees, move the fence a 1/2" away from the blade, set the height and run the top...

I understand the main advantage is size, but what are you sacrificing? My slider has two spots for "movement", where the rails pass through the body. The bosch, by my count has 5 places where...

How do the bosch pivots work? Bearings or bushings? What kind of maintenance do they need? Seems to me like they're making something pretty simple pretty complicated..

Yeah, I though about that. But, this is a present for his sister, and the tiles are trophies from a local bike race she does every yr. She only has two of them right now, the others will be added...

Clients wants a picture frame to hold four tiles. The idea is to make it out of barn boards, and have it look similar to a four pane window. BUT, the tiles have writing around the outside, and are...

looks like it works great, but I was always taught not to sand and surface that will be glued..

http://www.arboristsite.com/forumdisplay.php?f=9 these boys will point you in the right direction.

Aaron

Thanks for the (constructive) help. Even I knew it was a crazy idea going in haha.. Maybe I'll try the thin kerf blade. Thanks again.

Aaron

it says 3 1/2 hp right on the side of the saw..

Its a self tensioning belt drive boss, all I'd have to do is swap brackets between motors. Radial arm saw is a DeWalt 7790. Single/ 3 phase, V- 120/ 208-240. A - 17/ 8.5 The saw is already wired...

sure am.. now tell me why this is a terrible idea..

Money is tight and I'm working on setting up my workshop. I've got a rigid 10" contractors saw, and I love it. I know its not a cabinet saw but it serves my needs. Only problem is that its a...

Yeah, if I can find the time I'll knock one out this week. I might have to opportunity to make 30-50 of these, would it be a viable option to have a sawmill cut a knife and have them cut it? Any...