Search:

Those famous words " I saw this in a demo and it worked great"
Chuck

What Roger said. These guys are super helpful and willing to share. They can tell you exactly what their product can do.
Chuck

A round of grateful applause for Keith and Jackie. This has been a wonderful endeavor you have led.
Chuck

It wouldn't hurt to call Jeff at Northfield and ask him if there are any gotchas waiting along your journey
Chuck

I can remember eggs, yes, I had eggs for breakfast today, I'm positive.
Chuck

I've been replacing my 7518's with the Bora as they die off, but I would always give a thumbs up to the 5625.
Chuck

end grain white oak would be my choice, but it's my choice for indoor boards too
Chuck

What else can be said but Thank You Keith

If you remove the 4 corner bolts and loosen one of the back alignment bolts (a little) the top will not only come right off, but when reinstalled and the alignment bolt tightened back the top will be...

Finally, Someone takes the science into consideration.:)
I think the code is more specific to kitchens than refrigerators/freezers, though still a good idea to keep them on separate circuits.
Chuck

Good work, glad to hear the flattening jig works well. I do wish this cookie fad would die though.
Chuck

Wisconsin to Kansas on a rollback could get expensive for open air travel
Chuck

Water cooled spindles are pumped coolant and as long as the air is purged should have no issues running in any orientation.

The Bora is a cheap direct replacement, got one after one of the 7518's died shortly after they announced the discontinuation of the line. Got an ad from Woodpeckers today announcing that they have...

Listen to Jeff Monson. Gerkin Rental has one of these trailers, $66/day 7000# capacity, pulls easy. No one cares more for your equipment than you.
Chuck

The big issue with Metabo is that they have diluted their brand with the Hitachi Power Tool name. When you see Metabo HPT it is not the same tool as Metabo.

I believe that the sterilization heat is done towards the end of the drying schedule when the wood is pretty close to it's final MC
Chuck

455965
If you squint a little bit and think alien, alien, alien you can see it.
Chuck

I am somewhat lost on why you are using a 10hp 12" duct system where you say you will only use one machine at a time which suggests that you will use blast gates. If you're not using blast gates then...

You won't have a problem once the saw has determined that it has come to a stop with a steady green light. At this point you can touch the blade all you want and no brake trigger. If you touch the...

Hi Mike,
It wouldn't help if you did participate on OWWM, one of the basic rules there is they don't give appraisals. And I don't know what old catalogs go for, sorry. Vintage Machinery works to...

That would be my 1914 Baxter Whitney 30" planer
Chuck

Short answer, it will work fine
Chuck

Add Quincy to your list
Chuck

Northfield is as good as they come.
Chuck