Search:

This is beyond good stuff...guy asks a question rather specific and Mr. Simpson answers in less than an hour and a half with the specific page number from a 74 year old catalog mucho kudos

I usually use white Jersey cedar available locally but I recently did a deck with Azek and had some leftovers I used the Azek for the seat and back but stuck with cedar for the legs worked out great ...

I have a twelve year old John Deere that shows 120 hours but I am positive it just works intermittently, mowing takes me about an hour and I cut about 32 times a year so its way off, but not totally...

http://images.craigslist.org/00505_ai8Zm8815kY_600x450.jpgI'm offering for sale this set of 4 Hand saw in excellent conditions asking $20 for all (not rust only needs good clean)

I passed on these...

I am going to guess that the ripped board must be at least 4 inches wide, and I am assuming you have a good micrometer to make the measurement. That said an difference of .007 could just as soon be...

OK I'll toss these out
Drinking soda at the fountain from paper cones in a metal holder
Flipping baseball cards
Watching Yogi Berra and Mickey Mantle on the Yankees
Playing with mercury in school...

A strong second to Max's comment about 1/2 a page back, quality is a huge factor, I have had 3 scroll saws a cheap one that was useless, a dewalt which is a very big improvement, and finally a hegner...

possible source for shallow threaded inserts http://www.pemnet.com/fastening_products/pem-self-clinching-fastener_new.html

Mike the 2hp motor will not have the power to run the compressor at the same speed as a 5hp motor, but by putting a smaller pulley on the 2 hp motor you will turn the compressor at a slower speed...

try Mcfeelys inc I have purchased from them and always been satisfied

regards
Carl

About 75% of my house heat comes from a wood stove and I love it. We always keep a kettle of water on the stove, the boiling water creates a measurable increase in the humidity in the air (NOT...

You will be very pleased with your saw. I bought a kit from Ron several years ago and am extremely happy with my saw. When I realized I had to drill the saw plate I stared at the kit for about 3...

I have the driftmaster on my 18 inch Laguna saw. This saw replaced a 14 inch delta with a riser block that I had for 25 years and used extensively to cut out decoy and other carving blanks. The saw...

Just yesterday I was having a discussion with a fellow woodworker about the difficulty of really cranking those round handles down hard when you need that extra squeeze. All the ideas mentioned...

Sam before you read my comments you should know that I am the guy who said "what are they thinking of, trying to sell water in a soda bottle". But I am a design engineer with a post grad degree in...

First point a major second to the star-tron gas additive, I have used it for ten years in my grady white with yamaha outboard and never had ethanol problems. About 3 years ago I replaced at 35 year...

I did it a while ago and from memory I think you loosen the allen screw on the pivot and rotate the large black knob to increase tension then retighten the allen screw you may have to play with it a...

All of the above make sense but I dis no see anyone mentiion checking the lower blade guides, I suggest you make sure that they are correctly set as well.

I don't think the parts availability should be a major concern. I recently sold my delta 14 inch with riser block, bought new and used for about 30 years, and bought an 18 inch Laguna from a fellow...

please add me to the list
Thanks
Carl

Add me also please

Please add me also

Please add me also

Add me please

Please add me for this item Thanks, Carl