Looking into getting a pocket hole machine. I am debating between these two. Any one directly compared them? Do they have the same angle? Does one cycle faster than the other one?
Type: Posts; User: Bobby Robbinett; Keyword(s):
Looking into getting a pocket hole machine. I am debating between these two. Any one directly compared them? Do they have the same angle? Does one cycle faster than the other one?
As the title says, does anyone have any suggestions on where to purchase 3.5 thick fiberglass insulation that is 48 wide x 100ft long? Its difficult to find a supplier that list their prices...
So I recently acquired a 5hp Delta 50-861 for a great deal and although it came with the huge filters, which are like over 10ft long but it did not come with the rings that mount to the housing which...
We are getting more request for dovetail drawers at work and the boss man wants me to look into setting up 4 dedicated dovetail jigs and routers to do our drawer pins and tails until we do enough to...
At work the other day we were discussing ways to improve our coping process for making cabinet doors. We have always used cope sleds that register off the fence. Now we have a sliding table shaper...
So I was recently kicking around the idea at work to build our own shop made cope machine for cabinet door rails. All of our cope and stick cutters are insert cutters and they are all from the same...
You can order some Rockler t track fence clamps that have micro adjustability. Use a couple of pieces of 80/20 aluminum extrusion and boom. A high quality super adjustable shaper fence.
I sometimes use a solid wood strip ripped so that 1/2 protrudes from the inside edge of the hinge side of the inside of the face frame. Then use standard 1/2 overlay hinges.
The issues I am having is finding barrels that have 24 openings in the tops. I guess that I could build a plywood adapter to join them together if the fit is close. So far I havent been able to get...
Hey guys I have a some what large 10hp d/c that uses 24 bags. The bags are always getting damaged and seem to not hold up well. Are there any drums or trash cans you guys could point me towards that...
Richard I should have mentioned in the first post that I never intended on building it with out a frame under it. As I posted yesterday the frame will be made of aluminum extrusion with an industrial...
No welding will be done. Might make a frame out of aluminum extrusion though. Every thing will bolt together. I suppose I could also use a slab of quartz. My local shop would sell me one for a deal
I guess this could be more of a metal working question. But it is for my Dewalt GE ras so I would like to get some input from you guys.
I want to build a couple of 8ft x 24 extension tables for...
Been looking at getting a Moulder for having the ability to make my own crown, light rail, bolection moulding and the occasional job for mitered doors. Will a W&H do this? The largest crown that I...
You can get a generic 36k btu mini split for under $2,500 each if you shop around. They are relatively easy to install.
You just need to adjust your oscillation cylinder. Look up the manual for an explanation of how to do this. I have two wide belt sanders. A new Cantec and an old Shing Sheng import. On my old Shing...
SCM probably wont reply until you set up an account. At least they never reply to me. I have a Balestrini Pico round end Tenoner and SCM has ignored every question that I ever sent them. I think you...
Any suggestions on who makes decently priced tooling for double end tenoners? Specifically panel raisers and ogee door edge plus round over with bead door edge cutters.
So I finally have my Crouch edge sander painted and reassembled and ready to go. Only thing is that I am not sure if I should cover the platen with graphite? My old edge sander had graphite on the...
So I just bought a brand new generic slider and am getting it all dialed in. One thing that I can not figure out is the tracking of the table being parallel to the top or blade. I have my magnetic...
I would t try it unless you do the impeller upgrade. The 2HP Harbor Freight unit cant support a 6 trunk line. At least that is what I was told. 5 would be perfect
You can use a 1/4hp feeder for running the sticking on cabinet doors or ripping or dadod on the table saw.
I have a 1/2HP feeder on my long bed jointer that I use solely for edge jointing on face frame stock in our cabinet shop. We converted the feeder to have a track instead of wheels and it works quite...
I would recommend a Starret or similar high end knife setting gauge
Thanks for the replies fellas.
Any reasons to keep this machine around in a cabinet shop?