Search:

I think it's real, here is a pic of the glue up
Jim

http://i188.photobucket.com/albums/z16/jlckmj/woodscooterassembly.jpg

Not my project, I came across this and thought that some of you would enjoy it.
Jim

Paul
I think what you want is the way to go, I have been around hot rods and street rods for more years than I want to admit. I have a buddy that has a 383 stroker in a 41 chevy and at this point...

Here is one for you car sign guys,
I had a buddy that put some of those cheap ebay flame magnets on his street rod as a joke about 2 weeks after getting the car painted and they pulled the metal...

Dave,
Like the other post said, go to 80/20 on Ebay and pick up their track, it is as heavy or heavier than Kreg's. I will try to post pics of what I did, (thrown together without much thought) it...

Mark,
I put them in the cabinets that I built for my bus conversion, Mine came with the bus when I bought it, but I have seen them at Rockler. If I remember they were about $15.00 ea.
Jim

LIke one of the other threads mentioned, if your saw seems to start slow, you may need to run a dedicated line from your fuse box to the saw, I would use at least #12 wire. That is the only thing I...

Keith,
The basic dimensions of the box are 6ft. wide, 24in. high, 30in. deep, then it sits on 4x4 with casters, It's about 35in. high to the level that the saw sits on. The wings are about 14-16...

it hurts, it hurts, stop the pain, stop the pain!!!
make it go away!!!!

this is one of the only forums that I read that I can not change the color by myself, and look what they pick for us.

jim

If I did it over I would not center it, I would off set it right for a longer bed.
Jim
http://i188.photobucket.com/albums/z16/jlckmj/SawstandSmall.jpg

I built one into my work / set up table from t track from 80-20 off of ebay, it works great. I was lucky that the tables (that I picked up free) had a large enough frame to router the track level...

I have the same base and the same joiner, I thought about putting the swivels like you did and changed my mind for the same reasons you are experiencing. I put my swivels on the narrow end and it...

In this country we refer to them as Bus Conversions, That is the reason I got into woodworking. I bought an old greyhound type bus to convert into a motorhome, and the prices I was getting to build...

Jeff
If you are really going to quit using that card, you have to cancel it or it will still be held against your credit score. I had several that I hadn't used in years due to high interest. When I...

I ran a locksmith business for 15 years, Call a local locksmith and have them check their catalogs, Its been 12 years, but they used to sell them with extended cylinders up to about 2 inches, and...

Marty
I have 10 1/2 foot in my shop, I've never needed more, the post about the fan to push the heat back down is good if you are in a cold climate.
Why are you doing plywood or osb on the...

I bought the video and the router table was my first project. I felt it was very informative, easy to watch and follow. I got a real good idea how to use the Kreg system with it, I don't think it was...

If you have been looking and researching, I'm sure you have read all the pro's and con's, I can not say the craftsman is better or not, but I can tell you that on my last project I had to rip 10 foot...

After you clean it if the smell is still there, sprinkle about a cup or two of fresh coffee grounds inside the cabinet. (This also works in a car if you hit a skunk, or someone gets sick.)
It is...