Search:

Planer will be inside. Shop is really clean. Trying to decide what micron. bag will work just using the blower on the planer. please advise

Just purchased the planer and stand and need advice on how to capture the tailings. Am planning on using a short section of 4" or 2 1/2" flexible tubing into some type of container. Really...

Hi Bill, Yes I have a 3520a and love it. One reason is that the pot allows lathe to completely stop( hardly ever use the red button). I have the conversion chart to get the rpm from led in rear and...

Have older 2035 with RPM readout in rear and would like suggestions on what I should install. Am going to try some texturing and embellishing.

The oiler on my pump hasn`t worked for years. Have been spraying wd40 into unit. That has finally ruined the vanes. Gast wants about $160 for vanes and new oiler. Would I be better off just buying a...

Have Gast 0522 vacuum pump that quit. Motor runs but no vacuum. Veins are gummed.

How can I repair? If I were to purchase a new pump What would you recommend?

What is the difference between a 10788 and a DW788?

Thanks Glenn, How is the quality of the saw? I have a 25 year old 20" vs Delta but very weak right hand which makes it difficult to pull the control knob. Looks like the 788 would be much easier. How...

[QUOTE=Bob Behling;2850395]Requesting a review of this scroll saw and what reasonable price should be for a used saw without stand or lite

CORRECTION SAW IS A 10788. SORRY

Requesting a review of this scroll saw and what reasonable price should be for a used saw without stand or lite

Am thinking about using Varathane oil based poly and appreciate any comments on that product as well as others for interior use. Thanks

Looking for what laser would work best for a hollowing device.

Would appreciate recommendation on where to purchase economical but functional set of 1/4" and 1/2" shank carbide router bits

the belt on 3520 is by Gates. Can be be purchsed from Motion Industries for approx $20.00 Price quoted 2 yrs ago vs $94.00 @ PM

How do the paper backed hook and loop discs perform compared to the cloth backed psa discs ?

Terry, do you spray both surfaces ?

What is the best adhesive for applying 10" discs to steel plate, allowing for easy removal?

Hi John, Regarding the Lenox blade, Which 1/2-3tpi blade are you using? Lenox makes some very expensive to very economical blades. Also on Brian`s blades, they must be alternate toothed with a raker...

Thanks John. Exactly what blade is this. Doesn`t a 8-tpi blade struggle getting through 12" thick wood?

Have 5 HP Laguna band saw and cut large green bowl blanks up to 8" thick. Would like advice on what blade to buy and from whom for a reasonable price. Thanks

Jeff, what size openings and what material and color is the fabric? Also what commercial store has this fabric?

Prashum, I used Imperial track. Also many other suppliers. Check Amazon.

Jeff, What size openings in the netting and where did you purchase? Also what clearance at the floor do you have? Thanks

Have just installed a cubicle curtain track around my lathe and need a recommendation on what to use for the fabric. Want to stay with a lighter color, preferably white.