Search:

Try these guys! THEY WERE THE FIRST TO MAKE INSERTABLE CARBIDE TURNING TOOLS!!!

I use them all the time on my 3520B and they are excellent!
...

Try these guys. They are american made!!! They were the first provide woodturning tools with replaceable carbide inserts. Simply the best micrograin carbide available since the owner of the company...

James,

The 3520b already comes with a converter. It simply runs off of 2 110volt legs (hence 220volt)and a ground. No need to spend any more money.

30 watts is plenty. I purchaced a 30watt gcc explorer about 2 years ago and am still amazed what you can do with it. We run this in an industrial atmosphere. We have multiple cnc wire edms,...

I have a large job requiring a lot of .354 cast cell acrylic. I can accomplish this in one pass with my 30 watt explorer with a standard 2" lense. 100% power 1% speed 1500 ppi. Would a different lens...

You would not use gas because you get contaminants in your compressed air supply. If that is the case, buy a new compressor or filter it better. Using a gas instead of "air assist" or in place of air...

I have also purchaced the explorer 30w from sign warehouse. I am very happy with my choice. At first my company wondered if we should opt for more wattage but ultimatly decided on 30 watts. We are...

Dennis- No that is not the case and no there are not multiple copies specified. It is set at 1 copy.

Vicky- Thanks for your thoughts. Yes I agree sometimes a file can become corrupted. However what baffles me is that the file in the laser will run corrrectly (stop EOF beep) and other times it will...

Wondering if other users experience this problem... Sometimes the machine runs in a loop. (It never sees the end of the file). Sometimes the file runs fine.(same file) Problem 2 : Say I am...

Instead of wondering why your bill is so high, do this: There is a product called kill a watt (you can buy them on e-bay). Plug your laser into this and it will tell you exactly how many kw you use. ...

Jeff- My company has recently purchased a gcc explorerII 30w and from what everyone has told me, you cant engrave on steel. Thats true but.. you can mark it without cermark. I can succesfully mark...

Your program must output "hpgl" (hewlett packard graphics language)to the print driver. If it wont, nothing will happen. Most cad programs will do this since they are used to drive plotters. Its that...

Bruce- Have you ever heard of bob-cad cam. I have been using it for programming my four mitsubishi wire edms. Works great for my laser too.(gcc explorer II 30w) On one of our last upgrades we were...

I have done both of my kids sony ds's. No worrys. Think of it as a piece of acrylic. Start with low power settings. I have a 30 watt explorer, what worked well for me was a speed of 50 and a power of...

Try this link, I think this should help. http://www.stl-laser.com/laser-cutting-grid.html