Search:

Type: Posts; User: Mike Kees; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. In my shop I used 1/8'' steel cable and a product...

    In my shop I used 1/8'' steel cable and a product called cable clutchers. the cable goes through a screw eye hook on the ceiling and then wraps around the outside of my pipe and back through the...
  2. Replies
    24
    Views
    1,051

    I would put new tires on from another source if...

    I would put new tires on from another source if the stock ones were junk. Like the way Alex tested that by installing the blade without tires to isolate the tires as the issue. Proves there is a real...
  3. Thanks Ray, I just ordered it.

    Thanks Ray, I just ordered it.
  4. need a source for flexible 3'' dust collection hose.

    FLEXIBLE is the key word here. Only need about 6 feet for my overarm blade guards on my sliding t.s. and my cabinet saw. I prefer good quality hose,the piece that I am currently using is great...
  5. There have been multiple posts on how to make a...

    There have been multiple posts on how to make a tension gauge way cheaper than buying one. John White has a simple design in his book "Care and repair of shop machines" that should help. I have a...
  6. Replies
    21
    Views
    873

    Jack I was just trying to figure out what...

    Jack I was just trying to figure out what problems you had with it. Not a fan boy of any one brand ,just like to know what works well. Thanks for sharing your experience.
  7. As a carpenter that seems like a real dumb way to...

    As a carpenter that seems like a real dumb way to build. About twenty years ago I bought an old building for my first shop. I t had a roof like this with rafters that someone tried to make into...
  8. Replies
    14
    Views
    452

    Hardie is cement fiber siding. It will break if...

    Hardie is cement fiber siding. It will break if you bend it far enough. The key is installing it with the proper nails and nailer. It needs a thinner diameter galvanized nail designed for Hardie...
  9. Replies
    24
    Views
    1,051

    I have a 14'' delta with riser block in my shop...

    I have a 14'' delta with riser block in my shop as my small saw. The bigger machine is now a centauro CO 600 (24''). I sold a 18'' Steel City when I bought the Centauro. I wish I had sold the Delta...
  10. Replies
    12
    Views
    562

    Thanks for the replies. I guess my first step is...

    Thanks for the replies. I guess my first step is to figure out how to spell the name properly .:D I do not need single phase ,that just happens to be what I found. Thanks for the Tersa information...
  11. Replies
    12
    Views
    562

    Casedie Pfs 41 jointer/planer combo

    Anyone have one of these machines ? I am looking for info on them,preferably from users. I have found a used one,this is a 16'' machine with a Tersa head and five horse single phase motor. I have...
  12. Replies
    21
    Views
    873

    OK ,what are you saying Jack ?

    OK ,what are you saying Jack ?
  13. Ryan I kind of agree with John. If the thing...

    Ryan I kind of agree with John. If the thing works well then just clean up the dinged fence and use it. I also buy most (96%) of my machines used,so maybe my expectations on appearance are lower than...
  14. Replies
    21
    Views
    1,046

    As a carpenter I have the " Construction master"...

    As a carpenter I have the " Construction master" calculator app on my phone. Used to buy the calculators and broke,stepped on ,dropped to many. The app was cheaper than a new calculator and I always...
  15. Replies
    52
    Views
    2,297

    One of my friends,an ex-employee bought one about...

    One of my friends,an ex-employee bought one about a year ago.I was really impressed by it,actually I think they are every bit as good as a Unisaw.
  16. Replies
    52
    Views
    2,297

    I would completely agree with the consensus...

    I would completely agree with the consensus except for one minor point. I have a cast iron router wing on the left side of my jobsite saw,and much prefer this location. This may or may not work with...
  17. Replies
    25
    Views
    967

    John I am interested.

    John I am interested.
  18. Replies
    8
    Views
    460

    So where did this end up Dueane ?

    So where did this end up Dueane ?
  19. Thanks, Grizzly it is then.

    Thanks, Grizzly it is then.
  20. Replies
    30
    Views
    1,195

    Third vote for what Howard and Darcy already...

    Third vote for what Howard and Darcy already said,make a set of alignment bars. The book by john White is an excellent resource for machine set up and adjustment.
  21. Replies
    10
    Views
    671

    Johnny ,where in the heck do you shop ? I would...

    Johnny ,where in the heck do you shop ? I would have snapped that up too,even though I have one already.
  22. Replies
    8
    Views
    384

    They do work great in a shop,or garage or even...

    They do work great in a shop,or garage or even the shed in the backyard.
  23. Thread: auction fun

    by Mike Kees
    Replies
    6
    Views
    556

    I think it looks like a circle cutting jig...

    I think it looks like a circle cutting jig someone built for a bandsaw.
  24. Replies
    32
    Views
    20,233

    I have 10 of the current Chinese made Pony pipe...

    I have 10 of the current Chinese made Pony pipe clamps and about 30 of the original U.S. made Ponys. The Chinese ones work just as well . I was going to buy about ten from Grizzly this summer when I...
  25. Replies
    8
    Views
    460

    I would check out Grizzly for one of the cast...

    I would check out Grizzly for one of the cast iron trunnions for the 513/514 series. It should be easy enough to fab/weld a new plate on the saw if it will not bolt right on. Same on the table side a...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4