18" h 37" w 24" d
Type: Posts; User: Don Bunce; Keyword(s):
18" h 37" w 24" d
Excellent!!!
https://www.finehomebuilding.com/1982/11/01/spring-loaded-dowelsI would drill the spindle and use a spring loaded dowel.
You might want to check on the maximum speed those are rated at. THE Nova Cole jaws are rated at 600 rpm max.
Hurricane rates theirs at 500 rpm max.
The Shopsmith minimum speed is about 600 o 700...
https://sawmillcreek.org/showthread.php?119919-1642-Balast-amp-Storage&p=2386786&highlight=#post2386786
this us what I did for mine.
http://www.davidreedsmith.com/Articles/TwoJawChuck/TwoJawChuck.pdf
Here are plans to make your own two jaw chuck.
Fine Woodworking issue 57 Mar/Apr 1986 pg 44 Carlyle Lynch
Looks like an adaptor of some sort. If you remove the quill from the tailstock, you should be able to use a rod to push it out.
https://sites.google.com/site/diyfirefly/100-hz-multi-sided-conical-midbass-horns
Also volvotreter.de
inlowsound.weebly.com
Pispeakers.com
You might be able to find what you need on Ebay.
https://drive.google.com/file/d/0B37nyVVAdcDnYkNNS1pWeHBHVXc/edit ...
If you ever wanted to make a bow saw, you now have the blade material you need.
https://www.bing.com/videos/search?q=Ray+MAKES&qft=+filterui%3auserpage-ucynfhz2kzub_lfztsrcliuw&view=detail&mid=5D27BC2CA85DF4F7BEC95D27BC2CA85DF4F7BEC9&&FORM=VDRVRV ...
Pete, whatever you do, don't do a google search for Rose Engine lathe, or Ornamental turning.
https://www.youtube.com/watch?v=qZzRtEL7n4w Here is the youtube video that shows it in action.
https://www.woodturnerscatalog.com/p/110/1479/Oneway-Drill-Wizard ...
Constructing the Mountain Dulcimer by Dean Kimball is an excellent book. Available through 3rd party sellers on Amazon, or Ebay.
Great job! I like the way you mounted the rotary table under the XY table. Much more convenient to angle the work into the cutter than to rotate the entire unit.
Welcome to the world of ornamental...
https://www.youtube.com/watch?v=otSjut1iGGk ...
Aluminum can be cut with a saber saw, and cleaned up with a belt sander or a file.
Depending on which xy table and if you are going to use a 5C spin index or a rotary table, you might consider mounting it on a thicker platform. If you have to use a riser of several inches between...
I used to do turning demos with a treadle lathe. I would tell people that my right leg was much stronger than my left leg and it would make me walk around in circles. I also told them I loved turning...
I am using the xy table from Shars, I believe the one from grizzly is the same. I mounted it to the bed of my PM3520b with a 8" x 12" x 1/2" sheet of aluminum with a 1/2-11 bolt in the center. It can...
That boring head should work fine. You will need to make your own bits. Best bet would to use 5/16 HSS drill blanks, since they are already hardened. Can be cut with an abrasive cutoff wheel.
...
You could make an equivalent of the JaHo by buying the parts separately. It appears to use the Proxxon KT70 micro compound table, ( 90 dollars from Amazon prime), a 4" rotary table,( 100-150 dollars,...