Search:

Looks fantastic! One of mine doesn't have a spec of nickel plating left on it, but still shapes wood when I need it.

edited to add: That is probably the nicest looking one I've ever seen.

Golf club epoxy comes in black.

I like state roads for property borders.

With single pane glass, if the sash or door is painted on the inside I use exterior paint on the interior side. Water will condense on the glass at some point and interior paint will buckle when it...

You don't have to push very hard with either to trim the cheap caulk. I've done some number of hundreds of window panes and never broken one when trimming it. I expect you'd have to push pretty...

I bed glass in cheap latex caulk. It’s not really exposed to air or light so it’s just a cushion and seal. It’s most important that it’s easy to remove when the time comes. Strong bond is not...

I never answer when someone asks for advise.

I didn't see knee pads in the picture. I expect they were on the photographer.

Been there. I don't do varying height floors, thresholds in doorways, nor curbs for showers. At least wood is easier than concrete. This was to replace a fiberglass shower in a 1974 tiled...

I was taught to use it all through school. Sentences without it don't bother me nearly as much as "your" used for "you're". I normally read pretty fast but still stumble over "your" being used...

No apologies needed. It's always an interesting problem to solve and not as much work when it belongs to someone else. I'd still like to know how the oil got in the combustion chambers.

No but keeping NOCO trickle chargers on the ones that don't get used much makes them last longer than those size batteries ever have before. In fact, I don't remember exactly when I started using...

I like to pull the inlet air over the motor.

If you want to move a lot of air you need a large inlet.

It’s a right tilt saw. Motor box would be on that side. Please read my earlier posts in this thread.

Diesel fuel sitting over a Winter shouldn’t be much of an issue. My 100 gallon tank has sat over Winters for 30 years with some in it. I do use some in Winters, but nothing like in grass growing...

And small tile saws:
...

Wire on this is .2mm.

https://www.amazon.com/Proxxon-37080-Wire-Cutter-THERMOCUT/dp/B0017NS8H6/ref=asc_df_B0017NS8H6/?

We don't know exactly what the end goal is, but I made a little sled for my tile saw out of Corian scraps for cutting multiple pieces exactly the same. With a glass cutting blade (also a diamond...

With no tank drain I would keep the tank full as much as possible. Some water does condense in them.

Shame on them for not providing a tank drain. I’ve never had any dealings with that category of tractors though. My smallest utility tractor is a 70 ho category 2. I have been looking at them for...

I've never seen a tractor fuel tank that didn't have a draincock at the bottom of the tank. You have to get under it, but even on the old ones it's pretty easy to operate. You can drain some out in...

If they allowed politicians there would be no question who holds the record, so I guess that's why they eliminated them.

Picture has been here a long time, so it's easy to find in my gallery. It's not a Powermatic, but they were made very similarly back then. This is my jobsite saw, moved with a loader. The front...

That’s still a new one. I’ve put over 3,000 hours on my utility tractor myself. The hour meter was broken when I bought it when it was 12 years old 33 years ago.

No question it’s a fuel issue.