I have a new to me G0513ANV. 17 inch. 2hp. Bandsaw. Before I had a 1980s delta 14 inch.
I'm looking for tips and tricks for setting up this saw. I'm familiar with all the Snodgrass tutorials. I'm...
Type: Posts; User: Mitchell Ristine; Keyword(s):
I have a new to me G0513ANV. 17 inch. 2hp. Bandsaw. Before I had a 1980s delta 14 inch.
I'm looking for tips and tricks for setting up this saw. I'm familiar with all the Snodgrass tutorials. I'm...
Does anyone with a Makita RT0701C (corded palm router) have any issues with changing depth of cut? How did you solve it? Would you just tighten the locking nut on the locking lever?
Anyone out here have an .svg for a tele? I have a laser guy who will cut a template for me.
I bought an older Performax 16/32. As you can see in the photos, the platen dips in middle (front to back). This causes my work to be thinner in the middle.
Are there any known fixes for this?...
I have a new to me Performax 16/32. My drum is 3/16 higher on the outside than on the inside. I've watched "Joe the woodworkers" video. Here's my thing, I pulled the spring out of the fine tune...
Hey all, I am making a pedal board for a guitar player I know.
455054455055
I am spraying general finishes high performance top coat. I plan on spraying about 5 coats.
Question: After the last...
Not a base. A template. For repetitive cuts.
Hi all. I know a guy with a laser. He cut me a router template out of ¼” hard board. Initially I wanted an acrylic template but he said that sometimes the laser will skew while going through ¼”...
Thanks everyone. Plywood it is.
That's what my gut says too. I've never edge banded anything before. Is it difficult?
This is a partial wall from a RV. It's MDF covered in plastic. I've been commissioned to make a new one.
453554
It's about 4.5 feet tall and 2.5 feet wide (at the widest point). 0.5 inch...
If you go the grizzly route pay close attention to the type of head. Spiral and Helical are NOT the same. It has to do with the orientation of the cutter. Spiral are perpendicular to the wood. ...
I should have been much more specific. Sorry. I'm looking for Brand and material for twist jobbers.
Hey folks, what are your go to drill bits for wood applications?
I am interested in Klingspor. I buy their belts for my ridgid sander. My next disc purchase will be from them. If I remember, I'll come back and update.
I have taken to scale drawings whenever possible. I buy rolls of 36" wide white paper. When I am drawing things out I can think through joinery, know my measurements, think about cutting order........
Yup I have used them. They are OK. They're cheaper for a reason. I have noticed that the hook and loop backing on the discs is hit and miss (sometimes I get discs that fly right off my sander. ...
I sprayed my cabinets with a graco 390. I used Sherwin williams pro classic Alkyd Interior Enamel. I brushed the face frames (cannot tell I did). I removed all the hardware, built a spray booth in...
I was just emailing with Morgan at Laguna. He's got a 14SUV for $1,300.00. Probably worth investigating. Not sure I'd pay more than $1,200 for that 15 year old Laguna.
The Griz also has a 1.5 hp motor (Jet is 1).
I'd love to. I'd happily pay for shipping.
Yep, neck. Also, it has better resistance matching to the HB than a single would. 500k CTS pots.
Custom neck plate from Philadelphia Luthier Tools & Supplies:
447258
My pups are being made as we ... type?
Bootstrap pickups in Ohio.
This will be a very heavy metal guitar.
Airline stocks are still very low, they seem to be a reasonable holding place for tech and MBS.
I know. I could make it all work but the actual riser. Getting the pin locations EXACT is necessary and I don't have a milling press or vise.