Search:

I use the same one as you,I haven't had a reason to look for anything different.

I would find a local cabinet shop in your area that will sell you some of theirs,or order it for you.They will have access to much better stuff than buying from a box store.The sheets from box stores...

Have you thought about a tip out tray hinge used for sink cabinets?

I have used them on several kitchens, I mostly have used the Reva Shelf brand.One thing to take into consideration that the instructions don't tell you (at least I don't remember)is to allow for your...

This machine is sold.

Lathe is sold,

I just ordered a new ETS EC 125/3 random orbital sander to replace the one that quit working.The one that quit working kept turning off and on due to a bad connection where the cord plugs into the...

Shop Fox mortiser model W1671,used on 1 small project $300.Comes with a full set of new chisels and a set of lee valley mortise chisel sharpening stones.Pick up only.

I bought this a few years ago,never used it.Comes with a new chuck and is on retractable castors for easy moving.$1500 ,pick up only.

Try Fryburg door or Keim lumber.Keim Lumber will do about anything.

On paper,they are equal, but in reality they are not the same.Blum and Grass are superior to KV from my experiences, Right now,Grass and Blum are all but gone,so picking an alternative is our only...

If you want to measure the scoring kerf,just score a piece of scrap,and measure it with calipers.You can do the same thing with the main blade,lower the blade so it only leaves a score mark,then...

I use an Aigner fence on my Martin shaper,and run the panels face up,so the tongue is consistent regardless of the thickness of material, as previously mentioned.I bought smaller diameter spacers...

Have you thought about shimming the thicker blade over?

I wouldn't use poplar,the green will turn brown after a short period of time. B&B veneers sells dyed veneers.They are dyed all the way through,so no worries about sanding through the color.

Be patient, it will be over a year before I get the machine I ordered,even though I was told 3 months.

Would you be interested in 20" fs52es with a Tersa head?I had this built,and it showed up with a manual bed adjustment,and I ordered it with a powered bed adjustment,after a 7 month wait.They offered...

As far as the plunge cutting issue your having,try drilling out some of the material ahead of time with a drill bit.That should alleviate the problem of the router bit wanting to grab the workpiece.

I recently bought my first machine with a Tersa head (20'' Minimax J/P),and I like it a lot better than the Byrd cutters I have on my other machines.The biggest improvement I see,other than quick and...

Thanks for the input everyone,I will give it a try!

I am interested in getting a Lee Nielsen honing guide for my Veritas PM11 plane irons and chisels. Before I buy it,I want to make sure it will work for my tools,I can't tell if the jaws are...

This reminds of a saying I always think about;
"A man with 1 watch will always know what time it is,a man with 2 watches will never know what time it is. " :)

I live in Ohio,and have a clean 20" Powermatic with a Byrd head if your interested.

The DynaPro's are very easy,just slide the green wedge forward.

Why don't you use the adjustments on the guides to lift the low end up?