Search:

Marco has some water bottles.

Windex and extra fine steel wool

I have three New Hermes. Got the first one in 89 and learned quick that the machines were tough but the customer service was not there. Then found out about Quality One Engravers for service and have...

My problem with the dirty stock shows up when the box is not sealed good. My shop is at the end of the UPS route. Anywhere from 5:00 to 8:00 of the evening.
The UPS driver drives many miles down...

Classic Medallics out of New York has Triathalon medals and 2" inserts

Bruce

Sal,
From just one of my suppliers, they have 50 different col. in the round and the same for oval. Looking at all my suppliers, there are way more than 100 designs of col.

I carry around 30 to...

I also had problems with JDS paper leaving pizza wheel marks with my C88. Switched over to Johnson Plastics paper with no problems. I guess that the Johnson Plastics paper dries quicker.

Bruce

I agree that there might be more to the story. What will the customer use these for, something that he is making and selling for his own profit or a group of kids that he is working with; 4-H, Cub...

Terry,
Went through the same thing last month. My M-300 30 Watt would start a vector cut on 1/4 acrylic cutting just fine. Would cut all the way through for about three inches and by the time it...

Novachromeusa has two sizes of plates listed.

Bruce

Freeman also has the santa figure.

Also sent an e-mail.

Bruce

Depending on the size of the job, sometimes I will leave the nose cone off, or leave the film on the brass, or use a burnisher tool.

Bruce

Check out the Abernathy boys from Frederick

Up in Beaver, OK they have the world championship cow chip throwing contest, but I think the queen is known as Miss Pioneer

Bruce

And yet, another way

In your sample, your job is 12x1.8 in size
In the object position x box type in 12/2 hit enter
In the y box type -1.8/2 hit enter

Have you double checked the image position and size setting in the lay-out settings?

Did one side have a plastic film over it and what color did you get?

What color combo and how would the signs be mounted?

Maybe this might work?
...

Will this work?

If you are looking for something that has adhesive back to stick to shelves, can't you use plastic sheeting?

from the manual:

c. Nameplate.
(1) Description.

(a) The nameplate is a black, laminated plastic plate, 1 inch by 3 inches, 1/16 inch thick, with a white border not to
exceed 1/32 inch in...

I e-mailed usplastics some time ago about the Acrylite and this was their reply:

Hello

The 1/16" through 3/8" is extruded and the 1/2", 3/4", and 1" are cast.

Please feel free to contact us...

Me too!! Thanks!!

Count me in! Thanks!!!