Search:

Type: Posts; User: Aaron Pittenger; Keyword(s):

Search: Search took 0.00 seconds.

  1. Prashun, thanks for the suggestion - great minds...

    Prashun, thanks for the suggestion - great minds must think alike as I just did that today. I took another oak board and sprayed it with just lacquer. I laid it on pretty thick over the course of...
  2. John - The scotchbrite definitely gave the best...

    John - The scotchbrite definitely gave the best finish and it was definitely rougher on the one I didn't abrade first. That said, that is about where the good news ends.

    Long story short,...
  3. In case anyone helping (thank you all!) and/or...

    In case anyone helping (thank you all!) and/or following was curious, I just sprayed a few heavy coats of NC Lacquer this evening - I intend to let it dry a few days and then test everything. As you...
  4. Robert, That's what I gathered from my research....

    Robert,
    That's what I gathered from my research. On my test board I have it taped off into 8 sections. One of them I am following the same finishing schedule as previously (to hopefully recreate...
  5. Robert, thanks for the info. I was starting to...

    Robert, thanks for the info. I was starting to get that feeling - the first time (prior to stripping back everything) I did have a gray 'haze' on about 90% of the pores whereas the other 10% were...
  6. John thanks for the reply, It is somewhat thick,...

    John thanks for the reply,
    It is somewhat thick, but Mohawk does specify you can go up to 7 mil on their datasheet, so I wasn't sweating it. The original 1931 finish I stripped off was at least 2x...
  7. Piano Refinishing Issues (Shellac and Nitro Lacquer)

    Short version: Should there be any issues with a finishing regimen of Shellac->Solvent-Based Grain Fill->Shellac->Nitrocellulose Lacquer?

    I have been a long time reader, but this is my first post....
Results 1 to 7 of 7