Mine is older, it has a 2x4 splitter to a 5in port.
Type: Posts; User: cody michael; Keyword(s):
Mine is older, it has a 2x4 splitter to a 5in port.
Its only ever me in the shop so one tool is fine. I was going to run a wye off the dust collector one branch would be for tablesaw the other branch for planer/jointer. I would put gates next to the...
Is it worth spending the money to buy 5in if I already have 6in?
I have a grizzly 2hp dust collector, it has a 5 inch port for the impeller. Can I run 6in main lines off of it without issue? They would be short, 10-15 feet, metal tubing. I have some 6 in already,...
Thanks Your suggestions are similar to what I was thinking. Are there standards/recommended lengths/angles? I have a Benjamin's best kit with a 5/8 bowl gouge with a more Blunt grind and a 1/2 in...
I just upgraded from an old wood homemade sharpening jig to Grizzlies verwon of the wolverine jig.
So far I'm very impressed.
I remember seeing people talk about methods for getting things back...
Thanks everyone I just got installed. Played with grinder on of my tools, I have a little research to do on how to set it up for different grinds but the hardware seems really well built. It's the...
Thanks I think I will go with screwing to another board. I plan on it living in this spot but always nice to have options. If I screw to a good sized board if it moves I can always put a few small...
I bought this mobile workbench with drawers from harbor freight to put my grinder on. I also bought the grizzly version of the wolverine jig to put with the grinder. Would I be better off getting a...
I had a Delta x5 short bed 6inch jointer. Found a DJ-20 for about that price. I love it, huge upgrade, shortly after getting it I made a butcher block counter for my shop, I don't think I could have...
Thanks that is a very informative write up, I did not realize how complicated it was. These trees have been done for at least a year and air drying for about a month. When I checked there moisture...
I just have a household dehumidifier my plan is to let it run and every so often lower the humidity, I know there are charts but I don't understand them, any suggestions on how often I should lower...
I did not know that, thanks, I have increased temp around that speed normally just so it is easier on heater but normally I just turned off heat, with how well insulated it is it probably drops...
I don't know how to run but I guess now may be the time to learn lol. Thank you.
Hello,
I just recently bought a sawmill and cut up some cherry logs, I want to use a few pieces to make shelves in my kitchen some 1-1.5in for wall shelves and a thicker 2in piece for a counter...
I will think about it, they are amazing, I built a shed door as a torsion box, it feels like a bank vault lol. I would need to make it in at least 2 boxs though to get it up my stairs.
I am planning on getting rid of the box spring, otherwise it will be like 5ft tall lol. I have seen some pretty wimpy looking slats that have held up though.
supports are vertical, I need space for the slats, I want some flat solid surface either OSB or plywood on top of slats and I want the mattress an inch or 2 into the frame. I also need some space...
Sorry I wasn't clear. OSB over top of slats, my mattress needs a solid foundation, I don't think just slats would be enough. I was going to do slats, probably ash since I have a lot and then osb or...
I was planning on more of a 1.5x4 or 2x4 need to see what I have lol. Just used 1x4 for worst case, they are 80in long for king size bed, at 600lbs it sags 0.09 in total. That is 600lbs on one...
I am planning on a bed frame build, I am hoping to avoid a center leg due to my floor being wavy and my wife liking to move the bed. I saw these plans using a 2x4 under the slats/plywood to support...
No idea, you would need to research it.
Just wanted to leave a review. I bought a dj20 helical (byrd) from Holbren.com, they were super freindly/helpful through the whole process. I called after a few Weeks (was told it was backordered so...
Thanks, I think the main problem is there is a little baffle that makes the space for chips cut in half up under cutter. I have a helical head on order, I may try removing that baffle when I swap the...
I adjusted the carriage, the fence is now level. I don't think it will effect anything. So far this jointer is amazing. Can't believe how much of an improvement over my little x5. Only issue is the...