Search:

Any that you can't process immediately just put in black plastic garbage bags for up to 1 week and process it later.

Dick,

I was having same problem so I just didn't look at the photos (to much hassle). After reading your post I went to load some photos and low and behold it's now back to normal. Like you I...

Phil, You said:

"Apparently, the fix on the SMC side would be to add:

Code:
<meta http-equiv="X-UA-Compatible" content="IE=9" />to the top of the headinclude template, as documented in this...

Mike, I'm also having the same problem with the picture as you described.

I also have the same problem on another forum that uses this software:

Powered by vBulletin® Copyright ©2000 - 2014,...

Mike,

Thanks for the post about the pictures not loading. Once again I thought it was just me having the exact same problem.

Mike, Thanks for posting this. I thought I was the only one having problems with SMC. I have the latest Win 8.1 Pro and IE 11 and had to spend more time correcting the typing than posting. As you can...

T
a
n
k
s

M
I
k
e

Joe,

Good thing you got store delivery. Just have them load it in your pickup and you can uncrate it in the pickup and slide the bed off of the tailgate and install one of the legs. Then drag the...

Thanks for the idea of what to do with my bases.

Here's what I used the dish for. http://www.sawmillcreek.org/showthread.php?158705-Scrap-metal-to-cactus-yard-art

Try looking at: http://www.columber.net/ I've been buying hardwood from them for the 8 years I've lived here

I always use the carnuba first to give it the piece a hard base coat. After power buffing the carnuba I apply Ren wax with (usually) my finger and buff by hand with soft towel. This gives you the...

You don't say how large of piece you are trying to hold, but you could turn a plug and hold it between centers like this. 266397

Thanks Richard. I've turned plenty of captive rings, just not able to turn ones that interlock. I thought maybe you glued a broken one but then I thought maybe you figured a way to actually turn them...

It appears the rings interlock. If so, how did you turn them?

Hi Brian,
I've used a power wire brush wheel to clean the grooves, then clean with paint thinner and wipe black oil based paint across the grooves.

Hi Dan,

I do buff with carnauba, then apply Ren wax sparingly by hand off the lathe and buff by hand. I figure I get the hard wax shine with the Carnauba and the fingerprint, water spot protection...

Paul, I used 4 spaceballs on the 32" side and 2 on the 10" sides.

I built this entertainment center in 2008 with 3/8" or maybe 5/16" thick book matched cherry panels out of 5" wide stock for a panel that's 10" x 32" and haven't had any warpage, cracks or movement...

255893Just put a fuel filter inline to your pump inlet. You can see through them to see if they are plugging up with sawdust and/or debris. They are less than $3.00 at Wal-Mart.

Larry, You are making the assumption the jars are straight sided. What if they are flasks? Your string theory won't work.

(1). Pour from left jar and fill right jar, having 3 units left in left jar. (2). Pour right jar to fill middle jar which leaves 2 units in right jar. (3). Pour middle jar into left jar which leaves:...

Roger Congratulations on the UHMW adaptor. Looks good. You won't need any sealant on the 3 O-rings, it would just make a mess out of your spindle. But be sure and use an O-ring at the base of the...

Hi Rodger, If your headstock spindle is vacuum tight, IE no holes inside, you can build the spindle adaptor like the one I made for my Powermatic 3520B. The instructions can be found at :...

When the tenon is turned off

George, I used a drill press mortise attachment to build a Morris chair out of white oak and had to rebuild the quill on my Sears drill press when I finished the chair. The teeth on the rack and...