Search:

20v DeWalt, use 5amp batteries with it. If you want to go at it for hours then 8,9,12,amp batteries
I prefer 5 amp and change as needed as I only run that hard once a year. Use the batteries with...

I agree with Lee, let the saw run for about five minutes then shut it off for a minute or however long it takes for the blade to come to a complete stop. Then restart the saw.
I also agree with the...

I have a Berol less than a foot from the computer and another one down in the shop
Ron

Very nice work!
Not what I want in my house, however I could look at it and study it for at least an hour if I had the opportunity to do so.
Ron

Scraped a couple of those 8" saws twenty years or so ago. Could not give them away. Dad inherited them in the 60's
Ron

these are shop cabinets. As far as quality goes, I don't care too much. I thought it would be nice just to have a front to cover the slides/ Slides are Richelieu for extension. Fronts are to be...

Don't know where you live or where you are building this building. HERE in Central Ohio some/all of the newer posts rot off at ground level in 20-30 years. The OLD TREATED posts going back 60 years...

wash the surface with alcohol, let dry then apply the label.
Ron

I have learned over the years that a lot of tools loaned out don't come back especially if not returned in a month. The number of people I loan tools to now is 1 and even then they don't all come...

Foam backing rod with 1/8" of white Silicone caulking.
Ron

Personally I prefer horsepower. I use a higher horsepower router than others I know for the same job. I firmly believe that a higher horsepower router is easier to use as far as not bogging down ,...

As long as the correct breaker is used for the gauge of wire, the branch circuit is protected. Whatever that is wired/plugged into the circuit may not be protected.
Ron

Alan stated that the solar disconnects when Utility Co. power is lost. Also he has several disconnects already. Now it would be possible to install an Automatic Transfer switch OR a manual transfer...

I would go with this one
UNLESS you want a 10 1/4" saw, an 8 1/4 saw will cut more than 3" and cost about half of the 10 1/4" saw.
Can aways buy the saw off of Amazon and see if it will mount up,...

They are called transfer switches commonly used with generators. If your system automatically drops out, sure seems like it could be stand alone.
Automatic Transfer Switches - Electric Generators...

John
The newer 7730,7770 had a saber saw attachment, drum sander along with the molding/planer head guard. there was a drill chuck and I believe a router chuck attachment for the accessory end.
Ron

my shop is full to overflowing getting hard to move around, now taking over most of the rest of the basement for wood storage and may start doing final assembly and finish on the other side. Wife...

Sat on the deck and talked to the neighbors while it happened. Got dark enough the street lights came on, did cool off fast for a little bit. Amazing how much heat and light the sun produced when it...

drawer front is too light, needs reinforced somehow. lot of good ideas given already pick one. I have a 4 drawer chest for my clothes, made out of 3/4 cherry, dovetail's and 1/2 baltic birch bottoms....

Got out of Rehabilitation on Friday 4/5, straight to Surgeon's office for check of the stump, said 2 weeks and staples out. Prothetics rep was there set me up with a few things for caring for the...

Mike please report back if you change the rack.
I have the same drill press.
Ron

Make it a point to have my wife talk to the family auctioneer every time we pick up something from one of his online auctions. She has been told and I need to print out that if I go before cleaning...

Derek
Has been very interesting following along with this chair build. I have no desire to build one, however I have seen some things done that interest me and I hope to try sometime after I get to...

"Taxes are just over $8K "
And I am complaining about $2.4k on my house appraised 2 yrs ago at $250k

Some years back I made a concerned effort to hook all portable tools in the shop up to dust collection. All started due to using a router and then buying a baseplate that collected chips. Soon led to...