Search:

I would say 500 - 1000 range.

I'm thinking about getting my first lathe, without breaking the bank. My first question is has anyone hand any luck turning say 2 18" spindles / legs & joining them together to make a 36" spindle /...

Funny I was just looking at that!

Thanks! Good idea I will give it try.

Nice! If you think it is to big set it to the side build a smaller one & one you will need the size.

I have been thinking of making my urn, as for if it is legal to day I don't know, but back in 2007 I made my mom's. But know you have me second thinking my plan! LOL

I'm looking for input, advise & other ideas for this task with out breaking the bank. I'm wanting a rabbet plane to cut shallow 1/32 - 1/16 deep rabbets when cutting dove tails. I really don't want...

Has any one heard or seen anything about it this year?

Has anyone here made a new sole for a 12 1/2 before? If so how did you do it? I'm thinking make a 45 deg. jig, dill holes across & clean up with a chisel. Any other ideas?

I'm looking for some input on wheeled marking gauges I need to replace my old & cheap shop fox. I have been looking at Veritas micro adj. & Lie Nielson Tite mark if you have either one tell me what...

I know I should have searched it on here before buying my first card scrapers, but it is something I should have done years ago. I won't say I'm a expert at using them yet but the stuff I can make...

Yes but mine is all black.

This is exactly what I did, I cut up a beer can & made shims stacked them until it felt right & tight & it working fine. It may have the wrong cap on it, it was a freebie. It was found in a rental...

From what I can see see the lose rivet is the reason the iron will not stay in place, after the second or third pass the iron will angle off to one side then I have to tap it back in place other wise...

Hi my first post here but have been a reader for awhile. My question is I have a 1455B miller falls & the rivet that holds the lever cap on is lose. I know it needs to be smashed down some, but with...

Thank you! Put on my list of things to do in my new shop.

I have seen several post about people doing this some form several years back. My question is how are they holding up, has any one had any problems with the motor or impeller after some time doing...

Is any one running a ceiling fan in their shop with a hanging dust collector? My question is will the down draft of the ceiling fan mess up the circular air flow of the hanging collector?

Did anyone get any good deals last week end in Springfield? I was headed down to check it out until I saw the front tire on my bike was coming apart. So my plans got changed to finding a new tire. I...

Put a couple coats of glue on the edges of the MDF to seal it before you paint it.

Question for those who have made a bench top out of pine, how is it holding up? My fear is as soft as pine in dose it dent easily? Are pines form other parts of the county may be harder?

I just bought a pair of those yesterday, have you every used the Bessy or Jets,if so how do these compare?

Been there, sound like you are like me. You can't just walk away on a day like that thinking it has to turn around & you will fix it. I know it is easier said than done but there is a time to go do...

Has any any one found any thing that works for t track that is a cheaper alternative over buy the stuff offered by the big company's. There has to be someone making it for the non woodworking world....

Good point Ole, So why not attach your drop cord to the outside of the tube. It would not be as clean looking as his, but you could keep a eye on the cord. I have been playing with the same idea for...