My smooth, open wall space is too precious. I found working around surface mount stuff too awkward. It's a give and take. Even my HVAC lines are behind the walls. Pick your priority and go with...
Type: Posts; User: glenn bradley; Keyword(s):
My smooth, open wall space is too precious. I found working around surface mount stuff too awkward. It's a give and take. Even my HVAC lines are behind the walls. Pick your priority and go with...
I know what you mean I just had to quickly toggle the screen when my wife popped in to ask about dinner. :D
Fabulous job on that. I can almost hear it via the pics.
Realize I forgot to mention support. I had a 1-3/8" thick top that sagged. I realized this when my joinery wasn't fitting correctly. The table must be flat and the bit must be perpendicular. The...
Right. That also functions as the top tack point for skins in and out. You could tell that they were really slamming these things out. The sticks are all laid out in alignment forms at the factory...
Disclaimer: I am 5'10" (down from 6' in my younger days :D). A router table, like a router, is fairly personal so recommendations can be all over the map. I use a router table quite often so...
Kudos to Jim for mentioning this. The items are marketed as plug-n-play and they are . . . just not with the higher end specs if they are also doing wireless backhaul duty.
I have yet to take...
You can also try rotating your gate so that the corners that jam are not facing down. I have cut the corners out of gates to help with this. They leak a bit but never jam.
482086
Self cleaning...
I bought this No 9 a few years ago for $35 but prices have gone crazy.
482071
I'll assume the Stanley is a No 4. Patrick Leach's latest list has a 1930s No. 4 ready to go for $115 so that may...
I know we have a few folks doing or re-doing shops right now. I would like to emphasize:
- Take pictures.
- Take them sequentially.
- Name them well.
Knowing what is behind the wall I am about...
"Inherited 50+ board feet of rough sawn walnut - looking for advice." Best advice; send this annoying material to me for quick disposal :D.
Seriously, as mentioned, wire brush dirty material....
In my world it is like any M&T joint:
- tight for structural strength.
- loose if 'strength of joinery' is not required.
A loose setting would be where movement is desired and the M&T would not...
Nicely done John. Sorry I didn't see this and respond sooner. Well thought out, well executed, and sustainable through the replaceable parts.
Nice one Derek. I especially like the softened edges on the inside of the finger pull. Nice touch . . . no pun intended.
Disclaimer --- I cut my teeth on original Bessey K-Body parallel clamps and am heavily prejudiced :D. The views and opinions expressed in this post are those of the poster and do not necessarily...
I just helped my SIL this morning setup a used saw he bought. For a cabinet mounted trunnion machine I align the left slot (table) to the blade at 90 degrees and at 45 degrees before I put the wings...
My hydraulic cart experience was less than stellar. Of course it was a Harbor Freight cart. Despite rebuild attempts I could not get it to stop leaking on the floor. It got banished and will soon...
On my 15" the roller drops out with just one bolt on each side. Outfeed is the same. When I swapped to a rubber outfeed it was really easy.
OMG!!! More coffee - stat! Thank you Jim :D:D:D.
Box joint cuts are primarily crosscut operations so ore teeth = cleaner cut. Bridle joints are primarily rip cut operations so a 24 - 30 tooth FTG should do you fine. That said, I use a 50 tooth...
If anyone has one in a format that they can share I would be very grateful. If I ever come across the one my dad no doubt has squirreled away I will be glad to share.
To Tom's point, you can certainly initially flatten a face without relying on the fence. As soon as I have enough surface flat to allow me to plane the opposite side parallel I do that. I then use...
Sorry. Almost forgot. Under lighting :D
481424
It is adjustable and kind of emphasizes the floating effect. Makes for a nice ambient light when watching TV at night too.
Finally ;-)
481313 . 481311 . 481312
Running 101.0.1 on 3 Win 10 Pro 21H2 machines. Ubuntu 22.04 as well. No issues.
VEry similar to my G0453Z which has a built in mobility kit that works very well. I have these on a couple of large bandsaws and they work quite well for a commercial base. They started out as the...