Search:

#1--seal first!!! I use thin CNA--in your case I would hit it at lease twice since it's so deep. This should help with bubbles.
#2-- multiple pours of epoxy--maybe 1/4" at a time.

Bruce

What you are proposing seems like a very big undertaking, especially wanting to preserve the binding and center stripe!
I'm thinking the center stripe is doable with a contrasting (white maple?)...

I have an old Milwaukee mdl 5650 3.5 horse router that came w/a 1/4" collet.
I want to find a 1/2" collet and am having no luck! If the threading is the same I could buy
another mdl # collet.
Do...

I for one appreciate post's like this!!!
It's sooooo easy to get scammed if you're not careful.
I have had a few times when "Microsoft" would call about my slow computer. But I managed to...

I'd use the drill press and drill desired diameter at the angle you're shooting for.
Then affix the "guide" to the plastic drum. I'd prolly go with at least a 2+" chunk of off cut.
If I understand...

I think Seven Corners is now closed--maybe some time ago even???
I always liked going there also.

Bruce

I use my splitting maul on large ash logs ONLY when it's about -20F. They don't stand a chance in that temp.
But honestly I'm getting old so I have a 35 ton splitter--that works year 'round!!!
...

Tom,
On the internet hay steamers go for big bucks!!
My daughter has horses and is in know of such things.
She sent me this link -- if it will work....

I use vinegar to sharpen my files----never thought about sharpening sawblades......

Bruce

Grampa's Workshop on Grampa's table???

Bruce

Luckily for me I could see where they were embeded in the plastic door top. The sensors were under the foam seal on top of
the metal rail of the enclosure. I have been able to open and close the...

The safety door on my Epilog quit working years ago. I used 2 small neodymium magnets to "bypass" original
magnets---BUT----I still keep door shut.

Bruce

[/B][/I]

I believe SAE 20

Dave,
I went the same avenue as you describe! I have a 35 ton splitter that was un-startable in cold weather. I have the Fat Max 900 peak.
It also has trouble turning the splitter motor over...

Jeremy,
Don't give up! Learn the machine!
When you first turn on the laser there are a bunch of "idiot lights" on the mother board. You have to remove the cover to see them as I recall....

Or search for Kindorf trolley.

Bruce

No one mentioned "It's A Wonderful Life"???????

Bruce

Billy Strings and Tommy have a good video on YT also!!

Bruce

$22,500 all in.. Got a bunch of stuff to practice on and somewhat of a start-up kit.
Also a full day of learning/maintenance.

Bruce

The lasers I had were air cooled. Never a problem.
I do still have a CW, hasn't been turned on if ~17 years....need to buy it????

Bruce

$100 is a very good price!
Hopefully you can acquire the drivers for it. Mine went with the machine.
Both my machines did raster and vector. My first one was purchased in Jan. 1995. It had the...

Jeremy
My 1st machine was an LMI!! 2nd was also!
I started with Windows 3.1 and used them all the way through XP, so yes they will run on XP.
LMI sent out upgrades to install for the...

Alex,
I bought my 1st machine for $22,500 (25W LMI 36" X 12" table). I just wanted a laser, I'm not a businessman at all!
I did NO advertising but word of mouth got out and I started getting...

I had a similar situation in my son's shop after I wired it.
I installed GFI's for all outlets and they too would trip. Could not figger out why!!
Got on a contractors elec. forum and it turns out...

Don't forget electrical! You will want to have power to it.

Bruce