Search:

I like the colors, really stands out
it would probably look good engraved

i agree none of mine are for sale , its just a personal interest

going to trace out and digitize a diagram print out of a wolf and cut the parts out using a vinyl cutter using red vinyl and black vinyl colours
...

digitize a mountain sunset picture to be used as a vinyl print on a canvas tote bag

https://stankern.vids.io/videos/ac9edebe1b17e9cd25/digitize-a-mountain-sunset

design a colorful sunset ,digitize the diagram and vinyl print it for a heat transfer to a canvas tote bag
...

yard display lamp post in front of the house , interesting design to print out , trace out and create a file for the CO2 laser to cut out
...

coastal art traced out the paper print and created a *.dxf file to be cnc machined out using yellow cedar

https://stankern.vids.io/videos/449edebe1b17e6cacd/interesting-coastal-art

Yes i agree to lift the object off the table even 1/4 to 3/8 might be a better shadow effect

https://stankern.vids.io/videos/449dd6b81a1de4cecd/digitizing-a-small-racing-boat-plans

i passed this project finished to about 80% to a cottage owner
and they were supposed to send me photos,...

Keith
i was lucky on my first attempt, i see now that you need a projected light 90 degrees to the object and you focus on it and the shadow is perfect all around
I used a slide projector but i...

https://stankern.vids.io/videos/449dd6b81a1de4cecd/digitizing-a-small-racing-boat-plans this project, i passed this on to a cottage owner and he is running it but I never got any pictures back
the...

I enjoy these large projects, when i was a teenage i built balsa airplanes ...frames and tissue, when its in frames it looks cools
I had built a 14foot wingspan glider , the fuselage was amazing and...

dune buggy sounds great, my shop will not house any vehicle
its 3500 sq feet but i cannot get a vehicle into it, garage door is 20 in off the ground (loading bay) and there is too much equipment...

I checked with canada post and this full size veneer cannot be shipped , so it has to be cut in 3 or 4 pieces
Its too thick to roll up and then it becomes quite large
but cut it will ship

I was tired of doing boats so i always had my eye on an aircraft float (like the design in frames) so i found this one and i thought it would
make a catamaran (2 floats bolted together) but turned...

I have done boats before so this is something a bit different

https://stankern.vids.io/videos/d39dd6b81c1ae1c15a/digitized-a-duck-boat-plan this was interesting also

good video,

I don't think it will go that far

have cherry veneer 14 in wide varying a bit and 117 in long under 1/8 thick
very good grain pattern and matching pieces should be easy to custom cut and ship
located kincardine ontario
(also...

1/8 inch plywood and fiberglass

would like to see the shadow of an object, because i feel the light has to be like a lens light that you can focus

also i tried a few light sources and the best was a slide projector but its the focus that giving me grief
But the slide projector light was strong and gave a sharp shadow, i would like a...

can you resend the picture even with the light off

Keith
you need a good powerful light setup 90 degrees to the object, in my case i used a projector, but my ceiling being 8 foot i can only trace out small objects like say 18x18 in
I need to find...

this will show that placing a projected light 90 degrees to the drawing table
casts a shadow that can be traced and a dxf file created to allow a fitted foam
insert for that object using the CO2...