Search:

I ordered the Ridge 40T and 24T. It bothered me you can't get the Forrest Rip in a flat grind. Ridge owner replied to an e-mail about shipping almost immediately and refunded an error with their...

Hi all,

I just graduated to a Sawstop PCS 3HP from working on a Dewalt jobsite for a few years. New to me, not new but you'd be hard pressed to tell. I'm all caught up on the constraints of blade...

This is one of those "I don't really need it" tools but. .maybe someone else has one and is feeling the same and is willing to sell theirs?

Thanks,
Matt

Lee Valley/Veritas used to offer these detail chisels. Please let me know if you have any you're not using.

https://i.ebayimg.com/images/g/FZYAAOSwhSJlyAaB/s-l1600.jpg

Did anyone buy one and change their mind? I might be interested in yours if so.

I have a card that came with my set. It tells you what goes to what. They are all numbered on the ferrule except for the #1. There are 9 in total if you aren't considering the specialty (i.e. the...

Bump for the 7/16

If anyone has one of these 4" Blue Spruce or Vesper units available I'd be interested.

I acquired one of these yesterday second hand, in part due to the video and article from Derek. I don't have an immediate need for it but the price was right and the engineering behind it is very...

Some day I'll find this 7/16" chisel from Lie Nielsen. Weekly bump.

Weekly bump. Looking for a 7/16 Lie Nielsen bevel edge chisel. Thank you.

Hopeful for the 7/16. Seems like an odd size to find.

Greg,

When I built my benchcrafted bench last year the only chisels I had access to were the cheap Irwins off Amazon. I can't even say they were expertly sharp as I've come a long way since then....

I would like this one. Sending PM.

Sending a PM

I would like to see your auxiliary bench.

Still looking for the 7/16. Thanks.

I have the Benchcrafted Leg and Tail vises on my bench. They're wonderful.

Thanks to Frank Martin I have found the 5/16. Just the 7/16 now. Thanks.

I talked to LN yesterday. I believe these are very old stock that they have had on the shelf for many, many years. Possibly 20.

They dropped around noon yesterday. I was fortunate enough to grab a 3/16 for myself and help two of my friends grab one as well. The 1/8 went OOS first with the 1/10" mortise chisel.

Let me know if you have them kicking around. Thanks.

I will add that regardless of the steel I find I need to hit the strop to get that easily slice paper effect you're going for.

I did watch. It seemed like a lot of fluff not a lot of raw data like I was expecting. Didn't like that he messed up David Charlesworth's name.

But there were some good takeaways. Suman's video...

Here's what mine look like when I'm done with them on the 1000 Shapton.